KSB pump
The KSB Group is one of the leading producers of pumps, valves and related service offerings with annual sales revenue of almost 2200 million. KSB is the brand with the largest technical expertise in pumps and valves. ” This approach means that KSB products exist all over the world and are one of the most widely used pumps, and KSB industrial pumps are used for almost all industrial and liquid transport applications.
Types of KSB pumps
- KSB circulating pump
- KSB Submersible pump
- KSB centrifugal pump
- KSB centrifugal pump
- KSB hot oil pump
- KSB pump repair
The parts used inside the pumps are:
The parts used inside the pumps are:
All parts used in KSB pumps can be replaced and repaired.
•Pump housing:
Pump housing is the casing that encloses all the parts that comprise the working of a pump.
• Mechanical seal:
Mechanical seals are the most sensitive devices in the pump that are used to prevent water from penetrating into the engine. Each mechanical seal consists of several parts that have different dimensions and structure according to the efficiency of the pump.
•Shaft:
One of the parts that does not have problems easily is the shaft on which all pump parts are mounted.
•Impeller:
The impeller is responsible to move and transfer force to the liquid inside the pump.
Advantages of KSB pump
Advantages of KSB pump
Some of the most important advantages of KSB pump compared to other competitors are very high efficiency, optimal energy consumption, longer service life and also providing advanced equipment to control the components of this device. Although the KSB pump is produced in different powers, but the principle of quality and standard observed in the production of all of them, and finally the final consumer can choose the product he needs, following a correct and principled consultation.
KSB products are divided into several main parts: including domestic, industrial and agricultural uses, which include KSB centrifugal pumps, KSB hot oil pumps and KSB centrifugal pumps, KSB circulating pumps and types of mechanical seals, which of course are part of KSB products and each includes different models according to consumer needs.
Type of ksb pump
KSB circulating pump
Linear circulating pump belongs to the group of centrifugal pumps whose body is made of cast iron or steel and their impeller is made of cast iron, steel and brass. These types of electric pumps are produced in two types of single-phase and three-phase and single-cycle, two-cycle, three-cycle, four-cycle.
Also, they belong to “Energy consumption A” group in terms of optimal energy consumption and are able to pump fluids up to 100 to 130 degrees Celsius. A circulating pump is used to circulate or circulate gases or liquids in a closed cycle.
Therefore, The meaning of circulation is orderly movement through a circuit. Circulating pumps are mostly used to circulate hot and cold water in cooling and heating systems.
Circulating pumps are pumps that maintain the forced circulation of heated fluid in hot water heating systems. It is not enough to ensure a proper natural circulation speed based on density differences. Forced circulation means that smaller pipe diameters can be used to keep system costs low compared to natural circulation systems (such as gravity heating).
Small circulating pumps up to about 2.5 kW are driven by motors.
KSB Submersible pump
KSB submersible pumps are the most consumed around in the world industry due to features such as energy saving, high efficiency, no need for foundation and low operating and maintenance costs, strength and quiet operation and no increase in ambient temperature. . In general, KSB submersible pumps can be divided into Deep Well Submersible Pumps, sewage submersible pumps, and finally submersible drainage pumps, also known as sump pumps. These pumps must be stored and transported in a closed and dry environment with a temperature of 5 to 60 degrees and must be stored vertically.
The KSB submersible pump can be installed in three ways: one is vertical, which is the most widely used method, and the other is horizontal, which must be installed by an engineer, and the other is inclined, which uses very little of this method, and is similar to horizontal mode.
KSB’s Etanorm pumps
The design of the KSB ethanorm pump was first changed and updated in 1982. The Kasb pump is gradually becoming so popular and and its power is increasing to the point thatin 1986 the company bought the top pump manufacturer in France (pump Guinard S.A.) and two years later bought the company GIW Industries from the United States and added it to the KSB group.
KSB’s Etanorm pumps
The first series of KSB ethanorm pump was launched in 1987, and this production continued with vigor until the Exachem products entered the world market just two years later. KSB’s ambitions continued in those years, with almost every company, large or small, buying and using their technology to produce newer products. For example, it first launched a rainwater harvesting system in 1999 and used it as a primary source for construction services.
KSB centrifugal pump
A centrifugal pump is a mechanical device designed to move a fluid through the transfer of rotational energy from one or more rotors called impellers. The fluid enters a propeller along its axis that rotates rapidly and is ejected by centrifugal force along its circumference through the tips of the impeller blades.
Why is the KSB brand chosen?
Why is the KSB brand chosen?
Wherever there are fluids to transfer, control or shut off, customers around the world rely on KSB expertise and products. The KSB brand gives them excellent quality and high reliability. They also guarantee the services they can count on. Ksb works closely with suppliers and therefore partnerships, trust is created.
KSB acquisition is associated with the long-term value of working with suppliers with high quality standards and competitive prices.
Innovative products and business ideas are the result of global research and development by KSB Group. With global operations, KSB Group is interested in partnering with suppliers with a global perspective. The German KSB Group must meet the following criteria:
- High quality standards
- Competitive prices
- Process optimization throughout the supply chain
