Main applications
- Building services
- Drainage
- Groundwaterlevel
- (mining/buildings)
- Sea -& Riverwater
- Extraction
- Systems
- Waste water
- Waste water / sewage
- Water
- Water Extraction
- Watertransport
Design
Vertical single-stage fully floodable submersible motor pumps in close-coupled design, IP68, with or without level control, max. immersion depth: 7 m.
Application
Automatic drainage of pits, shafts, yards and cellars at risk of flooding, lowering of surface water levels, drainage, drainage of underground passages, water extraction from rivers and reservoirs.
Drive
- Motor winding to IEC 60038
- Motor design to EN 60043 T1/IEC 34-1
- Thermal class F
- DOL starting
- Enclosure IP68 (permanently
- submerged) to EN 60529 /
- IEC 529
Ama-Drainer NE/SE 10/35
AC motor
Integrated temperature switches
10-metre power cable
Shockproof plug
Desing Details
Ama-Drainer SD 10/11/35
- Three-phase motor
- Integrated temperature switches
- 10-metre power cable
- CEE plug (3L+PE+N) with motor contactor and phase inverter
Ama-Drainer ND 10/11/35
- Three-phase motor
- Integrated temperature switches
- 10-metre power cable with free cable end and protective cap
Overview of technical data
| Q (50Hz) | 2.0 – 50.0 (m³/h) |
| H (50Hz) | 1.5 – 22.5 (m) |
| Barrel casing | Yes |
| Type of bearing | Ball bearings |
| Drive | Electric motor |
| Drive frequency | 50 Hz |
| Type of drive | Electric motor |
| Drive voltage | Low voltage |
| Connection to power supply | 380/415 V 3~ |
| No. of impeller entries | Single entry |
| Impeller material (EN standard) | PA, POLYAMID (PA) |
| Type of coupling | Direct, None |
| Type of lubrication | Grease lubrication |
| Max. permissible fluid temperature | 40.0 (°C) |
| Pump set location | Wet well |
| Shaft material (EN standard) | 1.4021, 1.4571 |
| Suction characteristics | Non-priming |
| Type of casing | Volute casing |
| Type of impeller | Free flow impeller |
| Type of connection | Thread |
| UNSPSC classification | 4015150300 |
| Casing material (EN standard) | JL1040, 1.4401, 1.4301 |
| eClass assignment | 36410101, 36410000, 36410100, 00000000 |
| Free passage | 35.0 (mm) |
| Installation position | Vertical |
| Shaft seal type | Shaft seal ring, Mechanical seal |
| Main applications | Waste water / sewage, Building services, Water |
| Casing material | Chrome nickel steel, Stainless steel, Cast iron |
| Maximum drive rating | 2.2 (kW) |
| Type of installation | Stationary, Transportable |
| Maximum speed of rotation | 2800.0 (1/min) |
