Main applications
- Biogas
- Building services
- Drainage
- Flood control
- Groundwaterlevel (mining/buildings)
- Mining
- Pressure Drainage
- Process
- Sea -& Riverwater
- Extraction
- Systems
- Waste water
- Waste water / sewage
- Waste water lifting units
- Water
- Water Extraction
- Watertransport
Design
Fully floodable, vertical, close-coupled single-stage submersible motor pumps, IP 68, with or without level control, for a maximum immersion depth of 2 m.
Applications
Automatic drainage of sumps, pits, yards and basements subject to a flooding risk, lowering of surface water levels, drainage of underground passages, water extraction from rivers and reservoirs.
Drive
- Jacket-cooled single-phase AC motor
- Integrated temperature switch
- With cable and shock-proof plug
Shaft seal
- Drive-end: 1 shaft seal ring
- Pump end: two shaft seal rings
- A lubricant reservoir in-between the seal elements ensures
cooling and lubrication.
Bearings
- Enclosed bearings, grease-packed for life
Design
- All parts which will come into contact with the fluid handled
are made of rust-proof materials. - Fully floodable submersible motor pump
- Close-coupled design
- Vertical installation
- Single-stage
- Integrated swing check valve
- Pump controlled by integrated float switch
- Enclosure: IP68 (permanently submerged)
to EN 60529 / IEC 529 - Max. immersion depth 2 m
Installation types
- Transportable model
Overview of technical data
| Q (50Hz) | 0.0 – 16.5 (m³/h) |
| H (50Hz) | 0.0 – 12.0 (m) |
| Type of bearing | Ball bearings |
| Drive | Electric motor |
| Drive frequency | 50 Hz |
| Type of drive | Electric motor |
| Drive voltage | Low voltage |
| Connection to power supply | 230 V, 1~ |
| Explosion protection | OHNE |
| No. of impeller entries | Single entry |
| Impeller material (EN standard) | NORYL, POLYAMID |
| Type of lubrication | Grease lubrication |
| Max. permissible fluid temperature | 50.0 (°C) |
| Suction characteristics | Non-priming |
| Type of impeller | Open, Free flow impeller |
| Type of connection | Thread |
| Casing material (EN standard) | KUNSTSTOFF |
| Installation position | Vertical |
| Shaft seal type | Shaft seal ring |
| Main applications | Water, Waste water / sewage, Building services |
| Casing material | Plastics |
| Maximum drive rating | 1.05 (kW) |
| Type of installation | Transportable, Stationary |
| Maximum speed of rotation | 2800.0 (1/min) |
