Main applications ksb delta macro
- Building services
- Fire fighting and sprinkler systems
- Irrigation
- Pressure boosting, fire fighting systems
- Water supply
Technical data
- Q max 960.0 m³/h
- H max 154.0 m
Design ksb delta macro
Fully automatic package pressure booster system with two to four (F) / six (VC/SVP) vertical high-pressure pumps; available in cascade-controlled and two variable speed versions. Cascade control (F) for ensuring the required supply pressure. The frequency inverter operated VC and SVP versions ensure variable speed control of each pump via cabinet-mounted frequency inverter (VC) or PumpDrive variable speed system and KSB SuPremE motor (SVP), respectively, providing fully electronic control to ensure the required supply pressure. Automated with BoosterControl
Application pump ksb delta macro
Pressure boosting in residential buildings, hospitals, office buildings, hotels, department stores, industry, etc.
Drive pump ksb delta macro
KSB Delta Macro F, VC:
▪ Electric motor
▪ Efficiency class IE3 to IEC 60034-30
KSB Delta Macro SVP:
▪ Magnetless synchronous reluctance motor
▪ Efficiency class IE5 to IEC 60034-30
▪ KSB SuPremE
Desing Details ksb delta macro
- Compact system mounted on a common base frame
- 2 (F/SVP/VC) / 3 (F/SVP/VC) / 4 (F/SVP/VC) / 5 (SVP/VC) /6 (SVP/VC) vertical high-pressure centrifugal pumps
- Hydraulic components made of stainless steel / brass
- Integrated dry running protection
KSB Delta Macro F:
- DOL starting
- Power contactor per pump
- Discharge-side gate valve per pump For inlet conditions F and M only:
- Check valve per pump
- Suction-side gate valve per pump
KSB Delta Macro VC, SVP:
- With variable-speed system
- One frequency inverter per pump
Overview of technical data ksb delta macro
Q (50Hz) | 0.2 – 960.0 (m³/h) |
H (50Hz) | 0.0 – 154.0 (m) |
Type of bearing | Plain bearings |
Drive | IEC standardized motor, electric motor |
Drive frequency | 50 Hz |
Type of drive | Electric motor |
Drive voltage | Low voltage |
Type of installation | In-line |
Type of coupling | Direct |
Type of lubrication | Grease / Product lubrication |
Max. permissible fluid temperature | 60.0 (°C) |
Pump set location | Dry installed |
Suitable for drinking water | Yes |
Type of casing | Tubular casing |
Type of impeller | Closed / Radial |
Casing material (EN standard) | 1.4301, 1.4308 |
Minimum inlet pressure | 4.0 (bar) |
Installation position | Vertical |
Shaft seal type | Mechanical seal |
Main applications | Industry and process engineering, Water, Building services |
Casing material | Chrome nickel steel, Cast stainless steel |
Maximum drive rating | 55.0 (kW) |
Type of installation | Stationary |
Maximum speed of rotation | 2900.0 (1/min) |
Type of connection | Direct |
Operating mode | Cascade and variable |