Hyamat-V-Booster-pump-KSB
Hyamat-V-Booster-pump-KSB

Main applications hyamat V

  • Building services
  • Fire fighting and sprinkler systems
  • Pressure boosting, fire fighting systems
  • Water supply

Technical data

  • Q max 660.0 m³/h
  • H max 160.0 m

Design hyamat v

Fully automatic package pressure booster system with 2 to 6 vertical high-pressure pumps and continuously variable speed adjustment of one pump; for fully electronic control of the required supply pressure. Design and function as per DIN 1988. Automated with BoosterControl.

Application pump hyamat v

Pressure boosting in residential buildings, hospitals, office buildings, hotels, department stores, industry, etc.

Drive pump hyamat v

Electric motor 50 Hz, 2-pole, IE3, special KSB model, for three-phase mains

Desing Details pump hyamat v

Design

▪ Fully automatic pressure booster package system
▪ Baseplate-mounted
▪ Two to six vertical high-pressure centrifugal pumps, one of them with continuously variable speed adjustment
▪ Hydraulic components made of stainless steel / brass
▪ One check valve and shut-off valves to DIN/DVGW for each
pump
▪ Anti-vibration mounts for each pump for systems with Movitec 2B, 4B, 6B, 10B, 15B
▪ Systems with level-adjustable feet with rubber pads (supplied but not fitted) for systems with Movitec 25B, 40B, 60B and 90B
▪ Membrane-type accumulator (direct-flow) to DIN 4807-5 on the discharge side, approved for drinking water
▪ Pressure gauge for pressure indication
▪ Pressure transmitter on the discharge side
▪ Design and function as per DIN EN 806-2, DIN 1988-500

Installation type

▪ Stationary installation

Overview of technical data hyamat v

Q (50Hz)0.0 – 660.0 (m³/h)
H (50Hz)5.0 – 160.0 (m)
Type of bearingPlain bearings
Drive frequency50 Hz
Type of driveElectric motor
Drive voltageLow voltage
Type of first impellerClosed / Radial
Other impeller typesClosed / Radial
Impeller material (EN standard)1.4301
Type of couplingDirect
Type of lubricationProduct lubrication
Max. permissible fluid temperature70.0 (°C)
Nozzle positionIn-line
Number of pumps6
Maximum operating pressurePN 16
Pump set locationDry installed
Suction characteristicsNon-priming
Suitable for drinking waterYes
Type of connectionScrew-ended, flange
Type of stage casingStage casing with diffuser
UNSPSC classification4015150300
Casing material (EN standard)1.4301
eClass assignment36410101
Maximum inlet pressure10.0 (bar)
Installation positionVertical
Shaft seal typeMechanical seal
Main applicationsBuilding services, Water, Industry and process engineering
Casing materialChrome nickel steel
Maximum discharge-side pressure16.0 (bar)
Maximum drive rating22.0 (kW)
Type of installationStationary
Maximum speed of rotation2900.0 (1/min)
Standby pumpYes
Type of connectionIndirect and direct