Main applications ctn-h
- Breweries
- Chemical industry
- Food and beverages
- General Processes
- Industry engineering
- Oil /Gas
- Petrochemical Industry
- Pipelines and Tanks
- Surface treatment
Technical data
- Q max 980.0 m³/h
- H max 135.0 m
Design ctn-h
Radially split vertical shaft submersible pump with double volute casing for wet and dry installation, with radial impeller, single-entry, single-stage or double-stage; heatable model available. ATEX-compliant version available.
Application pump ctn-h
Pumping chemically aggressive liquids, also slightly contaminated or with a low solids content, in the chemical and petrochemical industries.
Fields of Application pump ctn-h
CTN
For handling chemically aggressive liquids, also slightly contaminated or with a low solids content.
CTN pumps can be used in the chemical and petrochemical industry.
CTN-H
For handling liquids which can only be pumped when warm or hot.
Desing Details pump ctn-h
Shaft seal
not in contact with the pumped product, gland packing or mechanical seal possible
Thrust bearing
little axial movement of the rotor; held in position by the shaft nut. Rotor adjustable on mounted pump
Plain bearings
adapted to operating conditions, product- lubricated
Overview of technical data ctn-h
| Q (50Hz) | 2.0 – 980.0 (m³/h) |
| H (50Hz) | 3.0 – 135.0 (m) |
| Type of bearing | Rolling element and plain bearings |
| Casing partition | Radially split |
| Drive frequency | 50 Hz /60 Hz |
| Type of drive | Electric motor |
| Drive voltage | Low voltage |
| No. of impeller entries | Single entry |
| Heatable | Yes |
| Maximum submergence | 9500.0 (mm) |
| Impeller material (EN standard) | JL 1040, 1.4408 |
| Type of coupling | Direct |
| Type of lubrication | Grease / Product lubrication |
| Max. permissible fluid temperature | 300.0 (°C) |
| Nozzle position | Variable |
| Maximum operating pressure | PN 16 |
| Pump set location | Dry installed, floodable |
| Shaft material (EN standard) | C45SH+S, 1.4571 SH |
| Suction characteristics | Non-priming |
| Top plate | Yes |
| Type of casing | Volute casing |
| Type of impeller | Radial, Closed |
| Type of connection | Flange |
| UNSPSC classification | 4015150300 |
| Casing material (EN standard) | 1.4408, JL 1040 |
| eClass assignment | 36410000, 36410100, 36410101 |
| Installation position | Vertical |
| Shaft seal type | Gland packing, Mechanical seal |
| Main applications | Industry and process engineering |
| Casing material | Cast iron, Stainless steel |
| Maximum discharge-side pressure | 16.0 (bar) |
| Maximum drive rating | 290.0 (kW) |
| Type of installation | Stationary |
| Maximum speed of rotation | 3500.0 (1/min) |
