Main applications upachrom 100 cc
- Groundwaterlevel (mining/buildings)
- Lake, Damwater extraction
- Water
- Water Extraction
- Well
Technical data
- Q max 24.0 m³/h
- H max 600.0 m
Design upachrom 100 cc
Multistage centrifugal pump in ring-section design made of stainless steel for well diameters of 100 mm (4 inches) and above, available with single-phase AC motor or three-phase motor with motor lead.
Application pump upachrom 100 cc
Domestic water supply, irrigation and spray irrigation, drawdown of groundwater levels, in fire-fighting systems, cooling circuits, fountains, pressure booster systems and air-conditioning systems.
Pump size: UPAchrom 100 CC, UPAchrom 100 CN
Drive pump upachrom 100cc
▪ Asynchronous motor
▪ Interior (buried) permanent magnet synchronous motor (IPMSM)
▪ With squirrel cage motor for submerged use
▪ Standard connection to NEMA
▪ Frequency 50 Hz/60 Hz
▪ IP68 enclosure
▪ Thermal class B
▪ DOL starting
▪ Frequency of starts ≤ 20 starts per hour
Single-phase AC motor:
▪ Rated power PN ≤ 2.2 kW
▪ Rated voltage VN 220 – 230 V
Three-phase motor:
▪ Rated power PN ≤ 7.5 kW
▪ Designs with additional stages and 6-inch motors of up to 18.5 kW are available for high heads.
▪ Rated voltage VN 380 – 400 V
Desing Details pump upachrom 100 cc
Design
▪ Centrifugal pump
▪ Multistage
▪ Single-entry
▪ Ring-section design
▪ Rigid connection between pump and motor
Connections
▪ Pump end with Rp 1 1/4 to Rp 2 thread
▪ With lift check valve
Impeller type
▪ Radial or mixed flow versions
Type of installation
▪ Vertical installation
▪ Horizontal installation
Bearings
▪ Radial plain bearings
▪ Pump bearings lubricated by fluid handled; motor bearings lubricated by water fill
▪ Axial thrust is balanced by a tilting-pad thrust bearing in the motor (lower end)
▪ Intermediate bearing in every stage
Overview of technical data upa chrom 4″
| Q (50Hz) | 0.2 – 24.0 (m³/h) |
| H (50Hz) | 5.0 – 600.0 (m) |
| Type of bearing | Plain bearings |
| Borehole diameter (inc | 00, 04 |
| Casing partition | Radially split |
| Diffuser material (EN standard) | 1.4301, 1.4401, NORYL |
| Drive | Electric motor |
| Drive frequency | 50 Hz /60 Hz |
| Type of drive | Electric motor |
| Drive voltage | Low voltage |
| Connection to power supply | 400 V, 3~ |
| Type of first impeller | Radial / Mixed flow |
| No. of impeller entries | Single entry |
| Other impeller types | Radial / Mixed flow |
| Impeller material (EN standard) | 1.4301, 1.4401, NORYL |
| Type of coupling | Direct |
| Type of lubrication | Product lubrication |
| Discharge casing material (EN standard) | 1.4301, 1.4401 |
| Max. permissible fluid temperature | 40.0 (°C) |
| Pump set location | Wet well |
| Shaft material (EN standard) | 1.4021, 1.4462 |
| Stage casing material (EN standard) | 1.4301, 1.4401, NORYL |
| Suction casing material (EN standard) | 1.4301, 1.4401 |
| Suction characteristics | Non-priming |
| Suitable for drinking water | Yes |
| Type of connection | Thread |
| Type of stage casing | Stage casing with diffuser |
| Type of suction casing | Annular casing |
| Casing material (EN standard) | 1.4301, 1.4401, NORYL |
| Installation position | Horizontal or vertical |
| Shaft seal type | Shaft seal ring, Mechanical seal |
| Casing material | Stainless steel |
| Maximum discharge-side pressure | 60.0 (bar) |
| Maximum drive rating | 18.5 (kW) |
| Type of installation | Stationary |
| Maximum speed of rotation | 3500.0 (1/min) |
