Main applications ksb delta basic
- Building services
- Fire fighting and sprinkler systems
- Irrigation
- Pressure boosting, fire fighting systems
- Water supply
Technical data
- Q max 88.0 m³/h
- H max 134.0 m
Design ksb delta basic
Fully automatic pressure booster system with two to three (MVP) / four (SVP) vertical high-pressure pumps in two variable speed versions. The frequency inverter operated MVP and SVP versions ensure variable speed control of each pump by motor-mounted frequency inverter for asynchronous motors (MVP) or PumpDrive variable speed system and KSB SuPremE motor (SVP), respectively, providing fully electronic control to ensure the required supply pressure. Equipped with a central fuse box.
Application pump ksb delta basic
Pressure boosting in residential buildings, hospitals, office buildings, hotels, department stores, industry, etc.
Drive pump ksb delta basic
▪ Electric motor
▪ Enclosure IP55
MVP:
▪ Efficiency class IE3 to IEC 60034-30
SVP:
▪ Efficiency class IE5 to IEC 60034-30
Desing Details pump ksb delta basic
- Fully automatic pressure booster system
- Variable speed operation
- Baseplate-mounted
- Membrane-type accumulator (direct-flow) to DIN 4807-5 on the discharge side, approved for drinking water, with shut-off element and drain valve.
- 2 (MVP / SVP) / 3 (MVP / SVP) / 4 (SVP) vertical highpressure pumps with variable speed control
- Hydraulic components made of stainless steel / brass
- Check valve per pump
- Pressure gauge
- Integrated dry running protection
- Pressure transmitter on the discharge side
- Anti-vibration pads per system
- Discharge-side gate valve per pump
- Suction-side gate valve per pump
- Suction-side manifold and discharge-side manifold made of stainless steel
Overview of technical data ksb delta basic
| Q (50Hz) | 0.2 – 88.0 (m³/h) |
| H (50Hz) | 0.0 – 134.0 (m) |
| Type of bearing | Plain bearings |
| Drive frequency | 50 Hz |
| Type of drive | Electric motor |
| Drive voltage | Low voltage |
| Type of installation | Long-coupled |
| Type of coupling | Direct |
| Type of lubrication | Grease / Product lubrication |
| Max. permissible fluid temperature | 60.0 (°C) |
| Pump set location | Dry installed |
| Suitable for drinking water | Yes |
| Type of impeller | Closed / Radial |
| Minimum inlet pressure | 4.0 (bar) |
| Installation position | Vertical |
| Shaft seal type | Mechanical seal |
| Main applications | Industry and process engineering, Water, Building services |
| Casing material | Chrome nickel steel, Stainless steel |
| Maximum discharge-side pressure | 16.0 (bar) |
| Maximum drive rating | 7.5 (kW) |
| Type of installation | Stationary |
| Maximum speed of rotation | 2900.0 (1/min) |
| Type of connection | Indirect |
