Main applications
- Building services
- Drainage
- Municipal waste water
- Waste water
- Waste water lifting units
Technical data
- Q max 46.0 m³/h
- H max 24.0 m
Design
Stable above-floor plastic collecting tank or impact-resistant underfloor plastic collecting tank, with floor drain and odour trap, both with Ama-Drainer submersible motor pump starting and stopping automatically and swing check valve
Application
Automatic disposal of waste water from washbasins, showers, washing machines, garage driveways, basements and rooms prone to flooding
Drive
- AC motor
- Three-phase motor
- Integrated temperature switches
Impeller type
- Open multi-vane impeller, free passage 10/11 mm
- Free-flow impeller, free passage 35 m
Desing Details
Design
- Single-pump unit or dual-pump unit
- 1 or 2 submersible motor pumps
- Fill level measurement via float switch
- Nominal tank volume 100 l or 200 l
- Collecting tank made of impact-resistant plastic
- Piping
- Integrated swing check valve
- To EN 12050-2
Underfloor box:
- Level-adjusting extension, cover plate with floor drain and
siphon trap
Above-floor box:
- Closed by odour-proof cover and locking ring
Installation
Underfloor box:
- Installation in substructures or foundations
Above-floor box:
- Mounting on the floo
Overview of technical data
| Q (50Hz) | 2.0 – 50.0 (m³/h) |
| H (50Hz) | 1.5 – 22.5 (m) |
| Barrel casing | Yes |
| Type of bearing | Ball bearings |
| Drive | Electric motor |
| Drive frequency | 50 Hz |
| Type of drive | Electric motor |
| Drive voltage | Low voltage |
| Connection to power supply | 380/415 V 3~ |
| No. of impeller entries | Single entry |
| Impeller material (EN standard) | PA, POLYAMID (PA) |
| Type of coupling | Direct, None |
| Type of lubrication | Grease lubrication |
| Max. permissible fluid temperature | 40.0 (°C) |
| Pump set location | Wet well |
| Shaft material (EN standard) | 1.4021, 1.4571 |
| Suction characteristics | Non-priming |
| Type of casing | Volute casing |
| Type of impeller | Free flow impeller |
| Type of connection | Thread |
| UNSPSC classification | 4015150300 |
| Casing material (EN standard) | JL1040, 1.4401, 1.4301 |
| eClass assignment | 36410101, 36410000, 36410100, 00000000 |
| Free passage | 35.0 (mm) |
| Installation position | Vertical |
| Shaft seal type | Shaft seal ring, Mechanical seal |
| Main applications | Waste water / sewage, Building services, Water |
| Casing material | Chrome nickel steel, Stainless steel, Cast iron |
| Maximum drive rating | 2.2 (kW) |
| Type of installation | Stationary, Transportable |
| Maximum speed of rotation | 2800.0 (1/min) |
