Etaseco-I-pump-KSB
Etaseco-I-pump-KSB

Main applications etaseco i

  • Energy
  • General Processes
  • Industry engineering
  • Special processes

Technical data

  • Q max 180.0 m³/h
  • H max 100.0 m

Design etaseco i

Horizontal or vertical seal-less volute casing pump in back pull-out design with fully enclosed canned motor, low noise emission, with radial impeller, single-stage, single-entry, casing connecting dimensions to EN 733.

Application pump etaseco i

Pumping aggressive, flammable, toxic, volatile or valuable liquids in the chemical and petrochemical industries, in environmental engineering and industrial applications.

Drive pump etaseco i

Three-phase, asynchronous canned motor, enclosure IP 55, without explosionproof status. Thermal motor protection by means of PTC thermistors. The motor design is in accordance with IEC 60 034 (DIN VDE 0530

Desing Details pump etaseco i

Design

Etaseco

Horizontal/vertical, sealless volute casing pump in back pull-out design, with fully enclosed canned motor, fitted with a radial impeller, single-stage, single-entry.

The connection dimensions of the pump casing comply with EN 733.

Etaseco-I

Inline pump in back pull-out design, with fully enclosed canned motor, fitted with a radial impeller, single-stage, single-entry.

Overview of technical data etaseco i

Q (50Hz)3.0 – 180.0 (m³/h)
H (50Hz)9.0 – 100.0 (m)
Type of bearingPlain bearings
Casing partitionRadially split
DriveElectric motor
Drive frequency50 Hz /60 Hz
Type of driveElectric motor
Drive voltageLow voltage
Connection to power supply220/400/690 V, 3~
No. of impeller entriesSingle entry
Impeller material (EN standard)JL1040, JS1025
Type of installationIn-line
Type of couplingNone, Direct
Type of lubricationProduct lubrication
Max. permissible fluid temperature140.0 (°C)
Nozzle positionIn-line
Maximum operating pressurePN 16
Pull-out designYes
Pump set locationDry installed
Shaft material (EN standard)1.4021
Suction characteristicsNon-priming
Type of casingVolute casing
Type of impellerClosed, Multi-vane impeller, Closed / Radial, Radial
Type of connectionFlange
Casing material (EN standard)JL1040, JS1025
eClass assignment36410100, 36410101, 36410000
Installation positionHorizontal or vertical
Shaft seal typeCanned motor pump
Main applicationsIndustry and process engineering
Casing materialCast iron, Nodular cast iron
Maximum discharge-side pressure16.0 (bar)
Maximum drive rating22.0 (kW)
Type of installationStationary
Maximum speed of rotation3500.0 (1/min)