Main applications cincp-cincn
- Chemical industry
- Industry engineering
- Oil /Gas
- Petrochemical Industry
- Water supply
- Q max 320.0 m³/h
- H max 95.0 m
Vertical immersion pump in cantilever design for wet or dry installation. Semi-open impeller, pump shaft without guide bearings, supported by ball bearings in the upper section. Supplied with discharge pipe extending above the baseplate (CINCP) or without discharge pipe (CINCN). ATEX-compliant version available.
Spiral pump casing with axial suction and radial impulsion.
Single-stage semi-open impeller. Filter in suction.
The CINCP series has a discharge pipe to the outside of the base plate. The CINCN series does not have a discharge pipe.
Pump is for vertical installation in non pressurized tanks as standard.
Application pump cincp-cincn
Chemical and petrochemical industries, raw materials extraction and waste water management.
Drive pump cincp-cincn
IEC frame electric motor. M V1 mounting arrangement
Desing Details pump cincp-cincn
Labyrinth sealing is supplied as standard.
IEC frame electric motor. M V1 mounting arrangement.
Bearings / Lubrication
Thrust ball bearings in the upper support and cylindrical roller bearing for radial loading in the lower support above the base plate. Both are lubricated through grease nipples.
Flexible, rubber plug type coupling. Other types, upon request.
Coupling Guard: Transparent plastic protections are supplied as standard. Metallic protections can be supplied as option.
Standard base plate is rectangular shaped, and non sealing design. Circular base plate can be supplied as option
Overview of technical data cincp-cincn
|Q (50Hz)||0.7 – 320.0 (m³/h)|
|H (50Hz)||3.5 – 95.0 (m)|
|Type of bearing||Rolling element bearings|
|Casing partition||Radially split|
|Drive frequency||50 Hz /60 Hz|
|Type of drive||Electric motor|
|Drive voltage||Low voltage|
|Connection to power supply||230/400 V, 3~|
|Explosion protection||ATEX (94/9/EC)|
|Type of first impeller||Single entry|
|Maximum submergence||1585.0 (mm)|
|Impeller material (EN standard)||CA6NM, CF8M, JL 1040|
|Type of coupling||Direct|
|Type of lubrication||Grease / Oil lubrication|
|Max. permissible fluid temperature||100.0 (°C)|
|Pump set location||Dry installed, floodable|
|Shaft material (EN standard)||AISI-316L, F-114|
|Type of casing||Volute casing|
|Type of impeller||Open|
|Casing material (EN standard)||CA6NM, CF8M, JL1040|
|Shaft seal type||Shaft seal ring|
|Main applications||Industry and process engineering, Water|
|Maximum discharge-side pressure||10.0 (bar)|
|Maximum drive rating||184.0 (kW)|
|Type of installation||Stationary|
|Maximum speed of rotation||3500.0 (1/min)|