Main applications delta solo/basic compact
- Building services
- Fire fighting and sprinkler systems
- Irrigation
- Pressure boosting, fire fighting systems
- Water supply
Technical data
- Q max 18.0 m³/h
- H max 55.0 m
Design delta solo/basic compact
Fully automatic, ready-to-connect package single-pump pressure booster system / dual-pump pressure booster system with variable speed system
Application pump delta solo/basic compact
Domestic water supply, water supply systems, spray irrigation systems, general irrigation systems, service water systems, rainwater harvesting
Drive pump delta solo/basic compact
▪ Electric motor
▪ Enclosure IP55
▪ Efficiency class IE3 to IEC 60034-30 (≥ 0.75 kW)
Desing Details delta solo/basic compact
▪ Fully automatic pressure booster system
▪ Variable speed operation
▪ Baseplate-mounted
▪ Membrane-type accumulator (direct-flow) to DIN 4807-5 on the discharge side, approved for drinking water, with shut-off element and drain valve.
▪ One or two horizontal high-pressure pumps with variable speed system
▪ Hydraulic components made of stainless steel / brass
▪ Lift check valve for each pump
▪ Pressure gauge
▪ Integrated dry running protection
▪ Pressure transmitter on the discharge side
▪ Anti-vibration pads per system
KSB Delta Basic Compact:
▪ Discharge-side gate valve per pump
▪ Suction-side gate valve per pump
▪ Suction-side manifold and discharge-side manifold made of stainless steel
Overview of technical data delta solo/basic compact
| Q (50Hz) | 0.2 – 18.0 (m³/h) |
| H (50Hz) | 0.0 – 55.0 (m) |
| Type of bearing | Plain bearings |
| Drive frequency | 50 Hz |
| Type of drive | Electric motor |
| Drive voltage | Low voltage |
| Type of installation | Close-coupled |
| Type of coupling | Direct |
| Type of lubrication | Grease / Product lubrication |
| Max. permissible fluid temperature | 40.0 (°C) |
| Pump set location | Dry installed |
| Suitable for drinking water | Yes |
| Type of impeller | Closed / Radial |
| Minimum inlet pressure | 4.0 (bar) |
| Installation position | Horizontal |
| Shaft seal type | Mechanical seal |
| Main applications | Industry and process engineering, Water, Building services |
| Casing material | Chrome nickel steel, Stainless steel |
| Maximum discharge-side pressure | 10.0 (bar) |
| Maximum drive rating | 1.5 (kW) |
| Type of installation | Stationary |
| Maximum speed of rotation | 2900.0 (1/min) |
| Type of connection | Indirect |
