Main applications kwp
- Ash removal
- Bio. treatment / 2.stage
- Biofuels
- Biogas
- Breweries
- Chemical industry
- Cooling water and condensate
- Desalination
- Drainage
- Energy
- Flood / stormwater holding tanks
- Flood control
- Flue gas desulphurization (FGD)
- Flue gas desulphurization plants (FGD)
- Flue gas desulphurization systems (FGD)
- Food and beverages
- General Processes
- Industrial Process
- Industry engineering
- Mech. treatment / 1.stage
- Mineral Mining
- Mining
Main applications kwp
- Mining
- Municipal waste water
- Oil /Gas
- Petrochemical Industry
- Pipelines and Tanks
- Power Stations < 100 MW
- Power Stations > 100 MW
- Process
- Rawwater transport
- Sewage treatment plants
- Slurry
- Special processes
- Steel
- Sugar
- Surface drainage
- Suspended solids treatment
- Tank cleaning
- Waste water
- Waste water transport
- Water
- Water treatment
- Watertransport
- Watertreatment
Design kwp
Horizontal radially split volute casing pump in back pull-out design, single-stage, single-entry, available with various impeller types: closed multi-channel impeller, open multi-vane impeller and free-flow impeller. ATEX-compliant version available.
Application pump kwp
Paper industry, cellulose industry, sugar industry, food industry, power plants, chemical industry, petrochemical industry, flue gas desulphurisation, coal upgrading plants, industrial applications, waste water transport, seawater desalination / reverse osmosis
Technical data
Q max 15,000.0 m³/h
H max 140.0 m
Drive pump kwp
Electric motor connected to the pump via a coupling or belt drive.
Desing Details pump kwp
Design
▪ Volute casing pump
▪ Back pull-out design
▪ Horizontal installation
▪ Single-stage
▪ Single-entry
Pump casing
▪ Radially split volute casing
▪ Volute casing with integrally cast pump feet
▪ Pump casing fitted with a wear plate
▪ Discharge cover available in the following versions
Bearings
▪ Oil-lubricated rolling element bearings
▪ Back pull-out design with axially adjustable bearing bracket to adjust the clearance between impeller and wear plate
Shaft seal
▪ Shaft fitted with a replaceable shaft protecting sleeve in the shaft seal area
▪ Gland packing
Overview of technical data kwp
| Q (50Hz) | 4.0 – 15,000.0 (m³/h) |
| H (50Hz) | 1.0 – 140.0 (m) |
| Type of bearing | Rolling element bearings |
| Casing partition | Radially split |
| Drive frequency | 50 Hz /60 Hz |
| Type of drive | Electric motor |
| Drive voltage | Low voltage, high voltage |
| No. of impeller entries | Single entry |
| Impeller material (EN standard) | CERAMIKPOLYSIC, ERN, NORICHROM, NORICLOR, NORIDUR 1.4593, NORIHARD |
| Type of installation | Long-coupled |
| Type of coupling | Jack shaft / Belt drive, Direct, Gear |
| Type of lubrication | Oil lubrication |
| Max. permissible fluid temperature | 280.0 (°C) |
| Nozzle position | End suction |
| Maximum operating pressure | PN10 |
| Pull-out design | Yes |
| Pump set location | Dry installed |
| Shaft material (EN standard) | C45+N |
| Suction characteristics | Non-priming |
| Type of casing | Volute casing |
| Type of impeller | Free flow impeller, Closed, Radial, Multi-vane impeller, Open |
| Type of connection | Flange |
| Casing material (EN standard) | CERAMIKPOLYSIC, JL1040, NORICLOR, NORICROM, NORIDUR 1.4593, NORIHARD |
| eClass assignment | 36410101, 36410000, 36410100, 36410103 |
| Free passage | 250.0 (mm) |
| Installation position | Horizontal |
| Shaft seal type | Mechanical seal, Gland packing |
| Main applications | Industry and process engineering, Water, Waste water / sewage, Energy, Mining / Dredges |
| Casing material | Special cast material, Cast iron, Duplex steel |
| Maximum discharge-side pressure | 10.0 (bar) |
| Maximum drive rating | 1500.0 (kW) |
| Type of installation | Stationary |
| Maximum speed of rotation | 3500.0 (1/min) |
