

Main applications
- Advanced treatment / 3.stage
- Bio. treatment / 2.stage
- Biogas
- Breweries
- Building services
- Chemical industry
- Cooling water and condensate
- Drainage
- Drainage pump stations
- Energy
- Flood / stormwater holding tanks
- Watertreatment
Main applications
- Flood control
- Food and beverages
- Industry engineering
- Irrigation
- Lake, Damwater extraction
- Mech. treatment / 1.stage
- Mining
- Municipal waste water
- Power Stations > 100 MW
- Pressure Drainage
- Process
- Sea -& Riverwater Extraction
Main applications
- Sewage treatment plants
- Surface drainage
- Suspended solids treatment
- Systems
- Waste water
- Waste water / sewage
- Waste water transport
- Water
- Water Extraction
- Water treatment
- Water works
- Watertransport
Design
Vertical single-stage submersible motor pump for wet installation, with cutter (S), free-flow impeller (F) or diagonal single-vane impeller (D), stationary or transportable version. Amarex N pumps are floodable, single-stage, single-entry close-coupled pump sets which are not self-priming. ATEX-compliant version available.
Application
Pumping waste water, especially untreated waste water containing long fibres and solid substances, fluids containing gas or air, and raw, activated and digested sludge; for dewatering and water extraction, drainage of rooms and areas at risk of flooding.
Drive
- Three-phase asynchronous squirrel-cage motor
- Type of protection Ex db IIB (applies to explosion-proof pump sets only)
- Enclosure: IP68 to EN 60529/IEC529
Desing Details
Shaft seal amarex N
Depending on the motor design:
▪ Two bi-directional mechanical seals in tandem
arrangement with liquid reservoir, with leakage chamber on some models
▪ Double cartridge seal with leakage chamber
Impeller type amarex n
▪ Various application-oriented impeller types (ð Page 14)
Bearings amarex n
▪ Various application-oriented bearings (ð Page 8)
Drive end:
▪ Grease-packed bearings sealed for life
▪ Maintenance-free
Pump-end:
▪ Standard bearings
– Grease-packed bearings sealed for life
– Maintenance-free
▪ Reinforced bearings
– Grease-lubricated bearings
– Can be re-lubricated
Overview of technical data
Q (50Hz) | 0.0 – 190.0 (m³/h) |
H (50Hz) | 0.0 – 49.0 (m) |
Type of bearing | Rolling element bearings |
Drive | Electric motor |
Drive frequency | 50 Hz /60 Hz |
Type of drive | Electric motor |
Drive voltage | High voltage |
Connection to power supply | 400 V, 3~ |
Explosion protection | EX-SCHUTZ EEX D IIB, ATEX 100A |
Type of installation | Close-coupled |
Type of coupling | None |
Type of lubrication | Grease lubrication |
Pump set location | Wet well |
Shaft material (EN standard) | 1.4021 |
Casing material (EN standard) | JL 1040 |
Free passage | 100.0 (mm) |
Installation position | Vertical |
Shaft seal type | Mechanical seal |
Main applications | Waste water / sewage, Industry and process engineering, Building services |
Casing material | Cast iron |
Maximum drive rating | 4.2 (kW) |
Type of installation | Stationary, Transportable |