Main applications Omega
- Building services
- Chemical industry
- Cooling water and condensate
- Desalination
- District heating
- Drainage pump stations
- Energy
- Fire fighting and sprinkler systems
- Flood / stormwater holding tanks
- Heat transfer, Cooling circuits
- Industry engineering
- Irrigation
- Lake, Damwater extraction
- Mining
- Municipal waste water
- Oil /Gas
- Petrochemical Industry
- Power Stations < 100 MW
- Power Stations > 100 MW
- Pressure Drainage
- Pressure boosting
- Pressure boosting, fire fighting systems
- Process
- Pumps used as Turbines
- Rawwater transport
- Special processes
- Steel
- Systems
- Waste water
- Waste water transport
- Water
- Water Extraction
- Water supply
- Water transport
- Water works
- Watertransport
- Watertreatment
Design Omega
Single-stage axially split volute casing pump for horizontal or vertical installation, with double-entry radial impeller, mating flanges to DIN, EN or ASME.
Application pump au monobloc
Pumping water with a low solids content, e.g. in waterworks, irrigation and drainage pumping stations, extraction duties in desalination systems, power stations, fire-fighting systems, shipbuilding, district heating or cooling.
Fluids handled pump Omega
OMEGA / OMEGA V pumps are designed for pumping water and other fluids with a low solids content. The pumps are very versatile and can be used for the following fluids, for example:
- Brackish water
- River water, lake and groundwater
- Stormwater
- Service water
- Fire-fighting water
- Cooling water
- Condensate
- Heating water
- Drinking water
Desing Details pump Omega
Pump casing
- Axially split volute casing
- Volute casing with integrally cast pump feet
- Replaceable casing wear rings
- Mating dimensions to EN or ASME
Impeller type - Double-entry radial impeller5)
Pump shaft
- Completely dry shaft
- Shaft protecting sleeves in the seal area
Shaft seal
- Gland packing
- Mechanical seal
Bearings
- For horizontal installation:
- Grease-packed rolling element bearings sealed for life
For vertical installation: - Product-lubricated plain bearing at the bottom / rolling
element bearings, greased for life, on top
Overview of technical data Omega
Q (50Hz) | 50.0 – 2,880.0 (m³/h) |
H (50Hz) | 7.0 – 210.0 (m) |
Type of bearing | Rolling element and plain bearings |
Casing partition | Axially split |
Drive frequency | 50 Hz /60 Hz |
Type of drive | Electric motor |
Drive voltage | Low voltage, high voltage |
No. of impeller entries | Double entry |
Impeller material (EN standard) | BRONZE, CHROMSTAHL, DUPLEXSTAHLGUSS, SUPER DUPLEX |
Type of installation | Long-coupled |
Type of coupling | Direct, Gear |
Type of lubrication | Grease / Product lubrication |
Max. permissible fluid temperature | 80.0 (°C) |
Nozzle position | In-line |
Maximum operating pressure | PN 10, PN 16, PN 25 |
Pump set location | Dry installed |
Shaft material (EN standard) | 13 % CHROMSTAHL, DUPLEXSTAHL |
Suction characteristics | Non-priming |
Suitable for drinking water | Yes |
Type of casing | Volute casing |
Type of impeller | Closed, Radial |
Type of connection | Flange |
Casing material (EN standard) | GRAUGUSS |
eClass assignment | 36410103, 36410100, 36410101, 36410000 |
Installation position | Horizontal or vertical |
Shaft seal type | Gland packing, Mechanical seal |
Main applications | Industry and process engineering, Water, Energy, Building services, Mining / Dredges |
Casing material | Cast iron, Duplex steel, Cast duplex steel, Nodular cast iron |
Maximum discharge-side pressure | 25.0 (bar) |
Maximum drive rating | 1500.0 (kW) |
Type of installation | 00 |
Maximum speed of rotation | 3500.0 (1/min) |