Main applications rwcp / rwcn
- Chemical industry
- Flood / stormwater holding tanks
- Industrial waste water
- Industry engineering
- Oil /Gas
- Petrochemical Industry
- Waste water
- Waste water transport
- Water supply
Design rwcp / rwcn
Process pump with free-flow impeller, semi-open or two-channel or three-channel impeller. Shaft sealed by mechanical seal or gland packing in accordance with various API pipework plans. Oil-lubricated bearings. ATEX-compliant version available.
Application pump rwcp / rwcn
Refineries, chemical and petrochemical industries, steel works, descaling units, raw materials extraction, waste water management.
Q max 800.0 m³/h
H max 60.0 m
Drive pump rwcp / rwcn
Desing Details pump rwcp / rwcn
Volute pump casing with axial suction and radial impulsion.
Three variants of single stage impeller: semi-open (A), channel (C) or vortex (V).
The RWCP is equipped with a discharge pipe to the outside of the base plate.
Pump is for vertical installation in non pressurized tanks as standard. Special executions for very low pressurized tanks are available on demand.
Lip seal is supplied as standard. Single mechanical seal (cartridge or non cartridge) or packing can be supplied as options.
Bearings / Lubrication
External angular contact ball bearings, grease lubricated, with external grease nipples, in a bearing bracket above the plate.
TFM (Special PTFE, Graphite charged) product lubricated friction bearing bushes in pump cover and intermediate column bearing supports. In case of poor lubricant, abrasives or solids, an external suitable fluid (e.g. fresh clean water) must be provided. Optionally an electric driven grease pump can be supplied.
Flexible, rubber plug type coupling. Other types, upon request.
Coupling Guard: Transparent plastic protections are supplied as standard. Metallic protections can be supplied as option.
Overview of technical data rwcp / rwcn
|Q (50Hz)||2.0 – 800.0 (m³/h)|
|H (50Hz)||0.9 – 60.0 (m)|
|Type of bearing||Rolling element and plain bearings|
|Casing partition||Radially split|
|Drive frequency||50 Hz /60 Hz|
|Type of drive||Electric motor|
|Drive voltage||Low voltage|
|Connection to power supply||230/400 V, 3~|
|Explosion protection||ATEX (94/9/EC)|
|Maximum submergence||5785.0 (mm)|
|Impeller material (EN standard)||CA6NM, CF8M, JL1040|
|Type of coupling||Direct|
|Type of lubrication||Grease / Product lubrication|
|Max. permissible fluid temperature||100.0 (°C)|
|Pump set location||Dry installed, floodable|
|Shaft material (EN standard)||AISI-316L, F-114|
|Type of casing||Volute casing|
|Type of impeller||Open, Free flow impeller, Three-channel impeller|
|Casing material (EN standard)||CF8M, JL1040|
|Shaft seal type||Gland packing, Shaft seal ring, Mechanical seal|
|Main applications||Industry and process engineering, Waste water / sewage, Oil / Gas|
|Maximum discharge-side pressure||16.0 (bar)|
|Maximum drive rating||300.0 (kW)|
|Type of installation||Stationary|
|Maximum speed of rotation||3500.0 (1/min)|