Main applications Surpresschrom SIC.2 SVP

  • Pressure boosting, fire fighting systems


Technical data

  • Q max 660.0 m³/h
  • H max 160.0 m

Design Surpresschrom SIC.2 SVP

Fully automatic package pressure booster system with 2 to 6 vertical high-pressure pumps. Continuously variable speed adjustment of all pumps with PumpDrive for fully electronic control of the required supply pressure. Automated with BoosterControl and PumpDrive.

Application Booster pump Surpresschrom SIC.2 SVP

Pressure boosting in residential buildings, hospitals, office buildings, hotels, department stores, industrial plants, etc.

Drive Booster pump Surpresschrom SIC.2 SVP

  • High-efficiency, magnet-less KSB SuPremE motor
  • Efficiency class IE4/IE5 to IEC TS 60034-30-2:2016
  • Control cabinet IP54
  • Pump control and monitoring unit
  • Graphical display with operating panel
  • LEDs indicating operational availability and fault of the
  • Service interface for connection to a PC
  • Transformer for control voltage
  • Frequency inverter
  • Motor protection switch per pump
  • Lockable master switch (repair switch)
  • Pressure transmitter on the discharge side
  • Circuit diagram and list of electric components
  • Terminal strip/terminals with identification for all connections
  • Connection for analog or digital dry running protection equipment
  • External ON/OFF connection
  • Field bus connection (optional)
  • Volt-free signals for dry running protection, warning and alert as standard
  • Volt-free signals for operation and fault per pump, voltage monitoring and phase monitoring (optiona

Desing Details Booster pump Surpresschrom SIC.2 SVP

  • Fully automatic pressure booster package system
  • Baseplate-mounted
  • Two to six vertical high-pressure centrifugal pumps
  • Hydraulic components made of stainless steel / brass for
    high operating reliability
  • One check valve (depending on the installation type) and
    shut-off valves for each pum
    Membrane-type accumulator (direct-flow) to DIN 4807-5
    on the discharge side, approved for drinking water
  • Pressure gauge for pressure indication
  • Pressure transmitter on the discharge side
    Pressure booster system with Movitec 2B, 4B, 6B, 10B and 15B:
  • Anti-vibration pads per pump
    Pressure booster system with Movitec 25B, 40B, 60B and 90B:
  • Level-adjustable feet and rubber pads (supplied but not

Fluids handled

  • System for handling clean liquids which are neither chemically nor mechanically aggressive to the pump materials.
  • Drinking water
  • Service water
  • Cooling water

Overview of technical data Surpresschrom SIC.2 SVP

Q (50Hz)0.0 – 660.0 (m³/h)
H (50Hz)10.0 – 160.0 (m)
Impeller material (EN standard)1.4301
Max. permissible fluid temperature70.0 (°C)
Guaranteed to be silicon-freeYes
Number of pumps4
Suction casing material (EN standard)JL 1040
Suction characteristicsNon-priming
Suitable for drinking waterYes
Switch-off pressure PA15.0 (bar)
Switch-on pressure PE2.0 (bar)
Type of connectionFlange
Type of stage casingStage casing with diffuser
UNSPSC classification4515150300
Casing material (EN standard)JL 1040
eClass assignment36410101
Maximum inlet pressure1.5 (bar)
Installation positionVertical
Shaft seal typeMechanical seal
Main applicationsIndustry and process engineering, Water, Building services
Casing materialCast iron
Maximum discharge-side pressure16.0 (bar)
Maximum suction pressure16.0 (bar)
Maximum drive rating22.0 (kW)
Type of installationStationary
Maximum speed of rotation2900.0 (1/min)
Type of connectionDirect
Operating modeCascade and variable