

Main applications emporia pd
- Irrigation
- Water
- Water supply
- Water transport
- Watertransport
Technical data
- Q max 3.0 m³/h
- H max 55.0 m
Design emporia pd
Peripheral impeller pump in close-coupled design for domestic applications
Application pump au monobloc
Spray irrigation systems, general irrigation systems, water supply systems
Drive pump emporia pd
- 2-pole induction motor
- With thermal protection and start capacitor
- 1~230 VAC, 50 Hz
- Thermal overload protection
- 3~230/400 VAC, 50 Hz
- Thermal class F
- IP44 enclosure
Desing Details pump emporia pd
Bearings
▪ Deep groove ball bearings
▪ Grease-lubricated for life
Shaft seal
▪ Mechanical seal
Fluids handled
▪ Clean to turbid water not containing aggressive, abrasive or solid substances
Material pump emporia pd
- Volute casing: Grey cast iron
- Shaft: Stainless steel AISI 416
- Impeller: Brass
- Motor housing: Grey cast iron
- Mechanical seal: Ceramics/graphite
Overview of technical data emporia pd
Q (50Hz) | 0.0 – 3.0 (m³/h) |
H (50Hz) | 0.0 – 55.0 (m) |
Type of bearing | Ball bearings |
Drive | Electric motor |
Drive frequency | 50 Hz |
Type of drive | Electric motor |
Connection to power supply | 230/400 V, 3~ |
Max. permissible fluid temperature | 90.0 (°C) |
Pump set location | Dry installed |
Type of casing | Annular casing |
Type of connection | Thread |
Installation position | Horizontal |
Main applications | Water, Building services |
Casing material | Cast iron |
Maximum discharge-side pressure | 8.0 (bar) |
Type of installation | Stationary |