Main applications
- Breweries
- Food and beverages
- General Processes
- Industry engineering
- Sewage treatment plants
- Surface treatment
- Waste water
- Waste water lifting units
Technical data
- Q max 40.0 m³/h
- H max 16.0 m
Design
Vertical single-stage fully floodable submersible waste water pump in close-coupled design (grey cast iron variant), non-explosion-proof.
Application
Handling waste water, especially waste water containing long fibres and solid substances, fluids containing gas/air, removing waste water from flooded rooms or surfaces.
Drive
- Single-phase AC motor
– 50 Hz: 230 V
– With integrated temperature switch - Three-phase asynchronous motor
– 50 Hz: 400 V
– DOL starting - Enclosure: IP68 (permanently submerged)
to EN 60529 / IEC 529 - Thermal class of winding insulation: F
Bearings
- Grease-lubricated bearings sealed for life
Desing Details
Design
- Fully floodable submersible motor pump
- Close-coupled design
- Vertical installation
- Single-stage
Installation types
- Wet-installed stationary pump sets
- Wet-installed transportable pump sets
Shaft seal
- Drive end
- Shaft seal ring
- Pump end
- 1 bi-directional mechanical seal with liquid reservoi
Overview of technical data
| Q (50Hz) | 0.0 – 40.0 (m³/h) |
| H (50Hz) | 1.3 – 16.0 (m) |
| Type of bearing | Ball bearings |
| Cutter | Yes |
| Drive | Electric motor |
| Drive frequency | 50 Hz |
| Type of drive | Electric motor |
| Drive voltage | Low voltage |
| Connection to power supply | 400 V, 3~ |
| Explosion protection | OHNE |
| No. of impeller entries | Single entry |
| Impeller material (EN standard) | JL1030 |
| Type of coupling | None |
| Type of lubrication | Product lubrication |
| Max. permissible fluid temperature | 40.0 (°C) |
| Pump set location | Wet well |
| Shaft material (EN standard) | 1.4021 |
| Suction characteristics | Non-priming |
| Suitable for drinking water | Yes |
| Type of casing | Annular casing |
| Type of impeller | Free flow impeller, Cutter |
| Type of connection | Flange |
| UNSPSC classification | 4015150300 |
| Casing material (EN standard) | JL1030 |
| eClass assignment | 36410101, 36410000, 36410100 |
| Free passage | 60.0 (mm) |
| Installation position | Vertical |
| Shaft seal type | Mechanical seal, Shaft seal ring |
| Main applications | Water, Waste water / sewage, Building services |
| Casing material | Cast iron |
| Maximum drive rating | 1.5 (kW) |
| Type of installation | Transportable, Stationary |
| Maximum speed of rotation | 2900.0 (1/min) |
