Main applications etanorm-rx
- Biofuels
- Desalination
- Fire fighting and sprinkler systems
- Irrigation
- Municipal waste water
- Pressure boosting
- Rawwater transport
- Steel
- Systems
- Waste water
- Water
- Water supply
- Water works
- Watertransport
- Watertreatment
Design etanorm-rx
Horizontal, long-coupled, single-stage volute casing pump (pump size 125-500 with two stages) in back pull-out design, with replaceable shaft sleeves / shaft
protecting sleeves and casing wear rings. Design to ATEX
Application pump etanorm-rx
Spray irrigation, irrigation, drainage, district heating, water supply systems, heating and air-conditioning systems, condensate transport, swimming pools, fire-fighting systems, handling of hot water, cooling water, fire-fighting water, oil, brine, drinking water, brackish water, service water, etc.
Technical data pump etanorm-rx
- Q max 600.0 m³/h
- H max 105.0 m
Overview of technical data etanorm rx
| Q (50Hz) | 18.0 – 600.0 (m³/h) |
| H (50Hz) | 35.0 – 105.0 (m) |
| Type of bearing | Ball bearings |
| Casing partition | Radially split |
| Drive frequency | 50 Hz /60 Hz |
| Type of drive | Electric motor, turbine, I.C. engine |
| Drive voltage | Low voltage |
| No. of impeller entries | Single entry |
| Impeller material (EN standard) | CC480K-GS, CUSN10-C-GS, G-CUSN10 |
| Type of installation | Long-coupled |
| Type of coupling | Direct |
| Type of lubrication | Grease lubrication |
| Max. permissible fluid temperature | 20.0 (°C) |
| Nozzle position | End suction |
| Maximum operating pressure | PN 10 |
| Pull-out design | Yes |
| Pump set location | Dry installed |
| Shaft material (EN standard) | 1.4057.05 |
| Suction characteristics | Non-priming |
| Type of casing | Volute casing |
| Type of impeller | Radial, Closed / Radial, Closed, Multi-vane impeller |
| Type of connection | Flange |
| Casing material (EN standard) | JL 1040, GJL-250 |
| eClass assignment | 36410000, 36410101, 36410100 |
| Installation position | Horizontal |
| Shaft seal type | Mechanical seal, Gland packing |
| Main applications | Building services, Industry and process engineering, Water |
| Casing material | Cast iron |
| Maximum discharge-side pressure | 10.0 (bar) |
| Type of installation | Stationary |
| Maximum speed of rotation | 2940.0 (1/min) |
