Main applications etaseco
- Energy
- General Processes
- Industry engineering
- Special processes
Technical data
- Q max 250.0 m³/h
- H max 100.0 m
Design etaseco
Horizontal or vertical seal-less volute casing pump in back pull-out design with fully enclosed canned motor, low noise emission, with radial impeller, single-stage, single-entry, casing connecting dimensions to EN 733, or in in-line design.
Application pump etaseco
Pumping aggressive, flammable, toxic, volatile or valuable liquids in the chemical and petrochemical industries, in environmental engineering and industrial applications.
Drive pump etaseco
Three-phase, asynchronous canned motor, enclosure IP 55, without explosionproof status. Thermal motor protection by means of PTC thermistors. The motor design is in accordance with IEC 60 034 (DIN VDE 0530
Desing Details pump etaseco
Design
Etaseco
Horizontal/vertical, sealless volute casing pump in back pull-out design, with fully enclosed canned motor, fitted with a radial impeller, single-stage, single-entry.
The connection dimensions of the pump casing comply with EN 733.
Etaseco-I
Inline pump in back pull-out design, with fully enclosed canned motor, fitted with a radial impeller, single-stage, single-entry.
Overview of technical data etaseco
| Q (50Hz) | 3.0 – 250.0 (m³/h) |
| H (50Hz) | 9.0 – 100.0 (m) |
| Type of bearing | Plain bearings |
| Casing partition | Radially split |
| Drive | IEC standardized motor |
| Drive frequency | 50 Hz /60 Hz |
| Type of drive | Electric motor |
| Drive voltage | Low voltage |
| Connection to power supply | 220/400/690 V, 3~ |
| No. of impeller entries | Single entry |
| Impeller material (EN standard) | JL1040, JS1025 |
| Type of installation | Close-coupled |
| Type of coupling | Direct |
| Type of lubrication | Product lubrication |
| Max. permissible fluid temperature | 140.0 (°C) |
| Nozzle position | End suction |
| Maximum operating pressure | PN 16 |
| Pull-out design | Yes |
| Pump set location | Dry installed |
| Shaft material (EN standard) | 1.4021 |
| Suction characteristics | Non-priming |
| Type of casing | Volute casing |
| Type of impeller | Multi-vane impeller, Closed, Closed / Radial, Radial |
| Type of connection | Flange |
| Casing material (EN standard) | JS1025, JL1040 |
| eClass assignment | 36410100, 36410101, 36410000 |
| Installation position | Horizontal or vertical |
| Shaft seal type | Canned motor pump |
| Main applications | Industry and process engineering |
| Casing material | Cast iron, Nodular cast iron |
| Maximum discharge-side pressure | 16.0 (bar) |
| Maximum drive rating | 18.0 (kW) |
| Type of installation | Stationary |
| Maximum speed of rotation | 3500.0 (1/min) |
