DESIGN Pumps MiniUKM
MiniUKM Series self priming wastewater pumps come with a compact design
Specially designed open impeller structure provides its self priming capacity without compromising its hydraulic performance. Maintenance and cleaning of the pump can easily be done thanks to its simple assembly and disassembly.
Usage of mechanical seal in these pumps, assures perfect sealing and a clean environment.
Stainless steel shaft is standard material in these series however bronze casting material is offered against corrosion for seawater applications
TECHNICAL specifications pump MiniUKM
Flow Range | 5 – 45 m3/h |
Head Range | 10 – 40 m |
Speed Range | 2800 – 3600 rpm |
Suction Lift | 7 m |
Pipe connections | 2” Suction-Discharge |
SCOPE OF APPLICATION pump MiniUKM
- Sewage sludge transfer pump
- Bilge Pump
- Ballast Pump
- General Service Pump
- Emergency Fire Pump
- Cooling Water Pump
Bearings pump MiniUKM
UKM M 50 series use bearings of the driver.
Drive Pump MiniUKM
- TEFC (Totally Enclosed Fan Cooled) 3 phase, squirrel caged, IM 1001B3
type electrical motor which complies with - DIN EN 60034 IEC is used to
drive the pump in proper speed and power. - Specifications of electrical motor;
Isolation class : F
Protection class : IP 54-IP 55
Frequency : 50 Hz
Running type : S1
Start up type : Up to 4 kW, 3×380 V (Y)
More than 4 kW, 3x380V (Δ)+(Y/ Δ
Shaft Seal pump MiniUKM
Pumps are supplied as standard a conventional packet gland, lantern ring for water sealing and lubricating of packing.
- Uncooled stuffing box without shaft sleeve is standard. ( Up to 90 °C )
- Uncooled mechanical seal with or without shaft sleeve is optional. ( Up To 90 °C )
- Water cooled stuffing box or mechanical seal is optional. ( 90 – 140 °C )
For a medium different than water, please consult to MAS DAF MAKINA SANAYI A.Ş. for selection of appropriate O-Ring and Mechanical Seal type