pump-KL-sea-land
pump-KL-sea-land

SEL-PRIMING CENTRIFUGAL ELECTRIC pump KL

The close-coupled centrifugal electric pumps with one impeller high flow series KL have been designed to pump clean liquids, without abrasives and suspended solids, non-explosive or aggressive for the pump’s materials

  • Liquid temperature not higher than 35 °C for domestic use (CEI EN 60335-2-41) or 90 °C for other use, while the ambient temperature must not be higher than 40 °C
  • Flow rate up to ~ 72 m3/h
  • Heads up to ~ 17 m

 

TECHNICAL FEATURES pump KL

  1. Pump body: cast iron G20 with anti-corrosive coating
  2. Motor bracket: cast iron G20 with anti-corrosive coating
  3. Impeller: stamped brass UNI-EN 12165
  4. Pump shaft: stainless steel Aisi 304
  5. Mechanical seal: carbon-ceramics

MOTOR pump KL

The control motors are asynchronous, squirrel cage-type, closed, with external ventilation

  • Incorporated motor protection and capacitor always on, for single-phase models
  • The motor protection for three-phase models must be installed by the customer.
  • Equipment compliant with current standards should be used
  • Class of insulation:F-service:S1-Degree of protection: IP 44
  • Terminal board protection: IP 54