CENTRIFUGAL ELECTRIC PUMPS ONE IMPELLER KF
The close-coupled centrifugal electric pumps with one impeller series KF have been designed to pump clear liquids, without abrasives and suspended solids, non-explosive or aggressive for the pump’s materials.
- Liquid temperature not higher than 35 °C for domestic use (CEI EN 60335-2-41) or 90 °C for other use, while the ambient temperature must not be higher than 40 °C
- Flow rate up to ~ 60 m3/h
- Heads up to ~ 18 m
TECHNICAL FEATURES pump KF
- Pump body: Cast iron G20 with anti-corrosive coating
- Motor bracket: Cast iron G20 with anti-corrosive coating
- Impeller: Cast iron G20 with anti-corrosive coating
- Pump shaft: Stainless steel Aisi 304
- Mechanical seal: Carbon-ceramics
MOTOR pump KF
The control motors are asynchronous, squirrel cage-type, closed, with external ventilation. Incorporated motor protection and capacitor always on, for single phase models.
- The motor protection for three-phase models must be installed by the customer. Equipment compliant with current standards should be used
- Class of insulation F
- Service S1
- Degree of protection IP 44
- Terminal board protection IP 54
