About Pump ego b
Single, threaded or flanged electronic circulators for sanitary water, with integrated electronic control with permanent magnet rotor and bronze pump body
Features
- Built-in frequency converter
- Numeric and graphical display for easy setup and visualisation of parameters
- Automatic venting function
- Built-in overload safety device
- High input torque (with consequent automatic release of the rotor)
- Possibility of four regulation modes (automatic, constant speed, variable Δp, constant Δp)
- Additional functions already integrated
description Pump ego b
Single electronic circulators for sanitary water, threaded or flanged, with integrated electronic control with permanent magnet rotor and bronze pump body.
High performance wet rotor circulation pump suitables for sanitary plants with threaded or flanged connection.
Ego B having bronze pump body and a permanent magnet motor, suitable for sanitary plants
Overview of technical data ego b
Flow rate | from 0.5 to 48.0 m³/h |
Total head | From 1.0 to 12.0 m |
Max. working pressure | 10 bar |
Max. ambient temperature | 0 ÷ +40°C |
Max. temperature of the liquid | +5°C ÷ +65°C |
Insulation class | F |
Protection degree | IP44 |
Voltage | Single phase 1~230V |
Min. suction pressure | 0.05 bar at 50°C 0.8 bar at 80°C 1.4 bar at 110°C |
Material Pump ego b
Pump body | Bronze |
Impeller | Technopolymer |
Shaft | Ceramic (Ego B threaded) Stainless steel for the rest of the range |
Rotor can | Stainless steel AISI 316 (EN 1.4401) |
pump ego b
Constant speed
The circulators of this range can work at constant speed on 3 preset curves. In this case, the pump works as a usual pump without regulation and the power consumption remains constant. When this mode is active the LED remains steadily lit; in this case the colour of the LED indicates the selected curve (“blue” the lowest curve, “green” the intermediate curve, and “yellow” the highest curve). To switch from one curve to another, briefly press the button to return to variable pressure mode, select the desired curve (indicated by the colour of the LED) and then press and hold down the button
Technical
- Liquid temperature: +5°C ÷ +65°C
- Room temperature: 0 ÷ +40 °C
- Relative air humidity: ≤ 95%
- Allowed fluids: clean, not aggressive and not flammable, free of solid particles or fibres
- Maximum pressure: 10 bar
- Minimum suction pressure:
– 0,05 bar a 50 °C - Threaded inlets: G1½ (in accordance with ISO 228)
- Flanged inlets: from DN 40 to DN 65
- Protection degree: IP44
MOTOR TECHNICAL DATA
- Type: synchronous with permanent magnets
- Motor speed: variable
- Supply voltage: 1~230V
- Frequency: 50/60 Hz
- Insulation class: F