

About Boosters 3GPE with E-SPD
Three-phase pressure boosters with three horizontal or vertical pumps in AISI 304 or AISI 316 steel with E-SPD inverter used for water supply in industrial plants. Available with special mechanical seals and in different versions
Features
- Versatility
- Compact dimensions
description Boosters 3GPE with E-SPD
Three-phase three-pump pressure boosters with E-SPD, the new generation EBARA inverter.
The 3GPE E-SPD stands out for its high flexibility. In fact, several special solutions are available, hydraulics entirely in AISI 304 or AISI 316 steel, pumps in special materials and mechanical seals to better meet the demands of industrial applications.
An essential characteristic of pressure boosters is their versatility due to the different versions produced:
- 3GPE CVM E-SPD, pressure booster with three vertical cast iron three-phase multistage pumps
- 3GPE EVMS E-SPD, pressure booster with three vertical three-phase multistage pumps
For further technical information consult the Databook
Note: other pressure booster configurations with different pumps, available on request - Water supply for industrial applications
Overview of technical data Boosters 3GPE with E-SPD
Max. working pressure | 10 bar for 3GPE CVM 16 bar for 3GPE EVMS |
Max. temperature of the liquid | +40°C for 3GPE COMPACT/CVM +50°C for 3GPE MATRIX/EVMSG |
Poles | 2 |
Insulation class | F |
Protection degree | IP44 for 2GPE COMPACT/CVM IP55 for 2GPE MATRIX/EVMS |
Voltage | Single-phase 1~230V ±10% Three-phase 3~400V ±10% |

Boosters 3GPE with E-SPD Ebara
SPECIFICHE DELLE CURVE
INDICE DI EFFICIENZA MINIMO (MEI)
Le specifiche riportate di seguito si riferiscono alle curve illustrate nelle pagine successive.
Tolleranze in conformità con ISO 9906 Allegato A
Le curve si riferiscono a una velocità effettiva dei motori asincroni a 50 Hz
Le misurazioni sono state effettuate con temperatura dell’acqua pulita di 20°C e con viscosità cinematica
n = 1 mm2/s (1 cSt)
La curva NPSH è una curva media ottenuta nelle stesse condizioni delle curve di prestazione.
Le curve continue indicano l’intervallo di funzionamento consigliato. La curva tratteggiata è solo indicativa.
Al fine di evitare il rischio di surriscaldamento, le pompe non devono essere utilizzate a una portata inferiore al
10% della portata di efficienza massima.
Spiegazione dei simboli:
Q = portata
H = prevalenza totale
P2 = ingresso alimentazione pompa (potenza albero)
h = efficienza della pompa
NPSH = prevalenza netta di aspirazione positiva richiesta dalla pompa
MEI = indice di efficienza minimo
L’indice di efficienza minimo (MEI) è una misura della qualità della pompa di una determinata dimensione in
relazione alla sua efficienza media
L’indice di efficienza minimo si basa sull’efficienza idraulica e sulla prevalenza al punto di massima efficienza.