SEL-PRIMING CENTRIFUGAL ELECTRIC pump KX
The close-coupled centrifugal electric pumps with one impeller series KX have been designed to pump clear liquids, without abrasives and suspended solids, non-explosive or aggressive for the pump’s materials
- Liquid temperature not higher than 35 °C for domestic use (CEI EN 60335-2-41) or 90 °C for other use, while the ambient temperature must not be higher than 40 °C
- Flow rate up to ~ 6 m3/h
- Heads up to ~ 30 m
TECHNICAL FEATURES pump KX
- Pump body: cast iron G20 with cataphoretic treatment
- Motor bracket: cast iron G20 with cataphoretic treatment
- Impeller: stainless steel Aisi 304
- Pump shaft: stainless steel Aisi 304 (Aisi 420 F for K 50-100)
- Mechanical seal: carbon-ceramics
MOTOR pump KX
The control motors are asynchronous, squirrel cage-type, closed, with external ventilation
- Incorporated motor protection and capacitor always on, for single-phase models
- The motor protection for three-phase models must be installed by the customer. Equipment compliant with current standards should be used
- Class of insulation:F
- Service S1
- Degree of protection IP 44
- Terminal board protection IP 54