About Pump ego t
Circulators with integrated electronic control with permanent magnet rotor with possibility of continuous adjustment of operation according to the system’s real demands. Applied for the circulation of hot and cold water in air conditioning and heating systems and solar systems.
Features
- AISI 316 rotor can without welding points
- Practical and easy to use
- High efficiency
description Pump ego t
Circulators with integrated electronic control with permanent magnet rotor that differ from standard fixed speed circulation pumps by allowing continuous adjustment of operation according to the real demands of the system, obtaining significant savings in electrical energy and a reduced noise level.
For further technical information see the Databook
• Circulation of hot and cold water
• Centralised, domestic air conditioning and heating systems
• Constant or variable flow solar systems where optimisation of the operating point is required
Overview of technical data ego t
| Flow rate | from 0.6 to 3.6 m³/h |
| Total head | From 0.7 to 8.0 m |
| Max. working pressure | 10 bar |
| Max. ambient temperature | 0 ÷ +40°C |
| Max. temperature of the liquid | -10°C ÷ +110°C |
| Insulation class | F |
| Protection degree | IP44 |
| Voltage | Single phase 1~230V |
| Max. glycol quantity | 20% |
| Min. suction pressure | 0.05 bar at 50°C 0.4 bar at 80°C 1.1 bar at 110°C |
Material Pump ego t
| Pump body | Cast iron with cataphoretic coating |
| Impeller | Technopolymer |
| Shaft | Ceramic |
| Rotor can | Stainless steel AISI 316 (EN 1.4401) |
pump ego t
Twin circulators cast iron with threaded connections, impeller in tecnopolimer, ideal for small systems
Technical
• Total head 0,7 ÷ 7 m
• Capacity 0,6 ÷ 3,6 m3/h
• Liquid temperature: -10°C ÷ +110°C
• Ambient temperature: 0 ÷ +40°C
• Maximum pressure: 10 bar
• Maximum percentage of glycol: 20%
MOTOR TECHNICAL DATA
• Type: synchronous with permanent magnets
• Motor speed: variable
• Supply voltage: 1~230V
• Frequency: 50/60 Hz
• Insulation class: F
