About Pump deminy
Submersible pump, with oil bath motor, for cooling and lubrication of the bearings and a double mechanical seal, oil bath (motor side) and water bath (pump side). Suitable for construction site drainage applications
Features
- Sturdy construction
- Versatility
description Pump deminy
Submersible pump, with oil bath motor, for cooling and lubrication of the bearings and a double mechanical seal, oil bath (motor side) and water bath (pump side).
The sturdy structure of the DEMINY electric pump makes it extremely versatile.
For further technical information see the Databook
• Drainage of construction sites and small tunnels
• Handling of moderately foul water containing abrasive materials, rainwater and groundwater
Overview of technical data deminy
| Max. temperature of the liquid | +35°C |
| Max. solids passage | 10 mm |
| Insulation class | F |
| Protection degree | IP68 |
| Voltage | Single-phase 1~230V ±10% Three-phase 3~400 ±10% |
| Max. immersion | 5 m with 20 m cable |
Material Pump deminy
| Pump body | AISI 304 (EN 1.4301) |
| Impeller | Special stainless steel for 50-80DEMINY in cast iron with special treatment for 100DEMINY |
| Shaft | Stainless steel 316 (EN 1.4401) |
| Mechanical seal | Impeller side: Silicon Carbide/Ceramic Motor side: Graphite/ceramic |
pump deminy
Suitable for drainage applications of construction sites and small tunnels, used for the movement of water containing moderate amounts of abrasive materials, rainwater and groundwater
Material
• Pump body: AISI 304 (EN 1.4301)
• Impeller: Special stainless steel
• Shaft: AISI 316 (EN 1.4401)
• Mechanical seal:
Impeller side: Silicon Carbide/Ceramic
Motor side: Graphite/Ceramic
Technical data
• Maximum immersion:
7 m with 10 or 20 m cable length
• Maximum temperature of the liquid:
35°C
• Maximum solids passage: 10mm
• Motor: 2 Poles
• Insulation class: F
• Protection degree: IP68
• Voltage: Single phase 1~230V±10%
Three phase 3~400V±10%
