About Pump ego slim
vNew single and twin flanged circulator pumps with technopolymer impeller and integrated electronic control with permanent magnet rotor. Ego 2 slim have enhanced compact design and are low in weight. Suitable for centralised systems, collective systems and thermal power stations.
- AISI 316 rotor can without welding points
- Bronze version for sanitary water available
- High efficiency
- Practical and easy to use
- Body insulation casing included
description Pump ego slim
New single and twin flanged circulator pumps with technopolymer impeller and integrated electronic control with permanent magnet rotor. Ego 2 slim have enhanced compact design and are low in weight.
They are ideral for centralised systems, collective systems and thermal power stations.
For further information see the Databook.
• Circulation of hot and cold water
• Centralised, domestic and industrial air conditioning and heating systems with constant or variable flow where the optimisation of the operating point is required
Overview of technical data ego slim
|Flow rate||from 5.0 to 72.0 m³/h|
|Total head||From 1.5 to 18.0m|
|Max. working pressure||10 bar|
|Max. ambient temperature||0 ÷ +40°C|
|Max. temperature of the liquid||-10°C ÷ +110°C|
|Voltage||Single phase 1~230V|
|Min. suction pressure||0.05 bar at 50°C |
0.4 bar at 80°C
1.1 bar at 110°C
Material Pump slim
|Pump body||Cast iron with cataphoretic coating|
|Shaft||Stainless steel AISI 316 (EN 1.4401)|
|Rotor can||Stainless steel AISI 316 (EN 1.4401)|
Single and twin circulators in cast iron with flanged connections, impeller in tecnopolimer, ideal for thermal plants, for large centralised and collective systems, characterised by a low weight and a more compact design.
Versions Ego T C easy are equipped with an additional communication module which can be accessed by opening the rear display panel. The
communication module is also available as an optional accessory. It is compatible with all standard models Ego easy.
The module enables running a wide range of applications remotely:
• Access via Ethernet
• Remote On/Off
• Analog control 0-10V
• Modbus RTU
• Alarm/state relay
• Total head: 0.3 ÷ 18.2 m
• Capacity: 6 ÷ 72 m3/h
• Liquid temperature: -10°C ÷ +110°C
• Ambient temperature: 0 ÷ +40°C
• Maximum pressure: 10 bar
• Maximum percentage of glycol: 20%
MOTOR TECHNICAL DATA
• Type: synchronous with permanent magnets
• Motor speed: variable
• Supply voltage: 1~230V
• Frequency: 50/60 Hz
• Insulation class: F