AGA-AGC-pump-ebara
AGA-AGC-pump-ebara

About Pump AGA – AGC

Cast iron self-priming centrifugal pump equipped with Venturi unit (ejector and diffuser) in PPE + PS reinforced with glass fibres. Suitable for residential applications

Features

  • Practical and easy to use
  • Lightweight and easily transportable
  • Available with brass impeller

Technical

  • Total head from 16.5 to 68 m
  • Capacity from 0.3 to 9.6 m3/h
  • Maximum operating pressure:
    – 6 bar for AGA 0.60 – 0.75 – 1.00
    – 10 bar for the rest of the range
  • Maximum liquid temperature 45°C
  • Maximum working width 8 m

description Pump AGA – AGC

Cast iron self-priming centrifugal pump equipped with Venturi unit (ejector and diffuser) in PPE + PS reinforced with glass fibres. Practical, easy to use and easily transportable thanks to its low weight.
The AGA-AGC self-priming pump installed on a flat, well secured surface allows for an installation of up to 8 metres.
Suitable for residential applications: garden irrigation, vehicle washing and clean water handling in general.
Lightweight and easily transportable, small in size.
For further technical information see the Databook

  • Domestic pressurisation
  • Small-scale garden irrigation
  • Washing of vehicles
  • Handling of clean water in general

Overview of technical data AGA – AGC

Flow ratefrom 0.3 to 9.6 m³/h
Total headFrom 16.5 to 68 m
Max. working pressure6 bar for AGA 0.60-0.75-1.00
10 bar for the rest of the range
Max. temperature of the liquid45°C
Max. suction depth8 m
Poles2
Insulation classF
Protection degreeIP44
VoltageSingle-phase 1~230V ±10%
Three-phase 3~230/400V ±10%

Material Pump AGA – AGC

Pump bodyCast iron
ImpellerPPE+PS with glass fibres for AGA 0.60-0.75-1.00,
brass for the rest of the range
ShaftStainless steel AISI 303 (EN 1.4305) (part in contact with liquid)
Mechanical sealCeramic/Carbon/NBR (standard)
Motor supportAluminium for AGA 0.60-0.75-1.00,
Cast iron for the rest of the range

pump je-jes

Self-priming cast iron electric pumps

AGA – AGC electric pumps are self-priming cast iron electric pumps equipped with Venturi group (ejector and diffuser) in PPE + PS reinforced with glass fibres. Practical, easy to use and easily transportable thanks to their low weight. The pump body is made of cast iron for all models. Among their peculiarities is that of having a shaft in steel AISI 303 (for the part in contact with the liquid).
The impellers are available in PPE + PS reinforced with glass fibres for AGA 0.60 – 0.75 – 1.00 and in brass for the rest of the range. The mechanical seal is in Ceramic/Carbon/NBR. The self-ventilated 2-pole asynchronous motors are IE3 high energy efficiency starting from 0.75 kW

PERFORMANCE CURVE SPECIFICATIONS

The specifications below qualify the curves shown on the following pages.
Tolerances according to ISO 9906:2012 – Grade 3B
The curves refer to effective speed of asynchronous motors at 50 Hz, 2 poles.
Measurements were carried out with clean water at 20°C of temperature and with a kinematic viscosity
of  V = 1 mm2/s (1 cSt)
In order to avoid the risk of over-heating, the pumps should not be used at a flow rate below 10% of best efficiency point.
Symbols explanation:
Q = volume flow rate
H = total head
P2 = pump power input (shaft power)
n= pump efficiency

characteristic-curves-pump-AGA-AGC

Pump Type

KW

Capacitor

Absored Current (A)

Q=Capacity

Single-phase

230V 50Hz

Three-phase

230/400V 50Hz

µF

Vc

Single phase

Three-phase

l/min

5

10

20

30

45

50

60

80

100

130

160

230V

400V

m/h

0.3

0.6

1.2

1.8

2.7

3

3.6

4.8

6

7.8

9.6

H=Total Head

AGA 0.60 M

AGA 0.60 T

0.44

12.5

450

3.1

2.1

1.2

37

33.4

27.1

22

16.5

AGA 0.75 M

AGA 0.75 T

0.55

14

450

4.0

2.8

1.6

45

42.8

37.9

32

21.9

18

AGA 1.00 M

AGA 1.00 T

0.75

20

450

5.5

3.6

2.1

47.5

45

40.3

34.7

29.1

27

23

AGA 1.5 M

AGA 1.50 T

1.1

35

450

8.1

5.3

3.0

48

45.1

42.4

38.6

37.4

35.1

30.8

27

AGA 2.00 M

AGA 2.00 T

1.5

40

450

9.8

6.3

3.6

59

55.6

52.2

47.3

45.7

42.5

36.4

30.5

AGA 3.00 T

2.2

7.9

4.7

68

64.3

60.8

55.9

54.4

51.6

46.4

42

AGA 1.50 T

1.1

35

450

8.6

5.8

3.3

38.5

37

35.6

33.5

32.7

31.4

28.7

26.1

22.4

19

AGA 2.00 T

1.5

40

450

10.5

6.8

3.9

51

49.9

48.8

46.9

6.3

44.9

42

38.7

33.2

27

AGA 3.00 T

2.2

7.9

4.6

58

55.6

53.5

50.1

49.1

47.1

43.4

40.2

35.9

32.5