prp2 Main applications
Thanks to its unique air handling design based on a standard centrifugal pump, the PRP2 series are particularly suitable as CIP return pump!
prp2 Design
The Packo stainless steel pumps of the PRP2 series are perfectly cleanable, 3A certified air handling pumps and are mainly used for handling a mixture of air and liquid. Thanks to its unique air handling design based on a standard centrifugal pump, the PRP2 series are particularly suitable as a CIP return pump in the pharmaceutical, biotech and semi-conductor industry.
prp2 benefits pump
- High pump efficiency lower energy consumption
- Low NPSH values: less risk on cavitation
- Electropolished: perfectly cleanable
- Easy & robust construction and easy maintenance: Less downtime
- Limited noise level
1 mechanical seal diameter for the entire range - Fully certified (roughness value, FDA, USP, 3.1 for wetted parts, certificate of conformity, etc.)
- Suitable for SIP
- Parts in contact < 0,4 μm
prp2 Description
The Packo stainless steel pumps of the PRP2 series are perfectly cleanable, 3A certified air handling pumps and are mainly used for handling a mixture of air and liquid. Thanks to its unique air handling design based on a standard centrifugal pump, the PRP2 series are particularly suitable as a CIP return pump in the pharmaceutical, biotech and semi-conductor industry.
prp2 Curve
Overview of technical data prp2
Max. flow | 80 m3/h |
Differential head | 75 m wc |
Max. Inlet pressure | 13 bar |
Viscosity | 10 cP |
Max. temperature | 140 °C |
Impeller type | Open |
Max. free passage | 22 mm |
Max. drive power | 22 kW |
Speed | 3000 / 3600 rpm |
Available frequency | 50 / 60 Hz |
Materials wetted parts | Stainless steel 316L for casing and backplate, 1.4435 for the impellers, duplex 1.4462 for metallic parts of the seal and impeller screw |
Available materials O-ring | EPDM, FKM, FEP-FKM, FFKM, Silicone |
Mechanical seal configuration | Single, quench, double |
Connections | Sterile connections |
Surface finish | Pharmaceutical quality, roughness value < 0,4 µm for wetted parts, electropolished and fully certified. |
Certificates | 3A. 1935/2004 EC. FDA. USP. ATEX. EAC |