NWP2 Main applications
These robust process pumps are often used as process pump for contaminated water as well as for CIP cleaning systems, filtration of wine, mash, beer, whey and blanching of vegetables.
Typical liquids: mash, wort, process and contaminated water, biodiesel, bioethanol, alcohols, CIP, biogas, etc.
NWP2 Design
The Packo duplex centrifugal pumps of the MWP2 series are robust pumps executed in wear resistant duplex materials and are ideal for handling erosive / abrasive liquids. Typical applications are animal liquid feeding applications.
NWP2 benefits pump
- Wear resistant duplex pump casing ideal for handling abrasive liquids.
- Low NPSH values: less risk on cavitation
- Electropolished: higher resistance against corrosion
- Easy and robust construction and easy maintenance: less downtime
- Easy to install
- Solid impellers compared to low cost spot welded versions
- 1 mechanical seal diameter for entire range
NWP2 Description
The Packo duplex centrifugal pumps of the MWP2 series are robust pumps executed in wear resistant duplex materials and are ideal for handling erosive / abrasive liquids. Typical applications are animal liquid feeding applications.
NWP2 Curve
Overview of technical data NWP2
| Max. flow | 50 m3/h |
| Differential head | 60 m wc |
| Max. Inlet pressure | 12 bar |
| Viscosity | 1000 cP |
| Max. temperature | 140 °C |
| Impeller type | Open |
| Max. free passage | 22 mm |
| Max. drive power | 11 kW |
| Speed | 3000 / 3600 rpm |
| Available frequency | 50 / 60 Hz |
| Materials wetted parts | Duplex pump casings |
| Mechanical seal configuration | single bellow, quench, double |
| Available O-ring materials | EPDM, FKM, Silicone |
| Connections | BSP fittings. flanges according to EN1092-1/01 & 02. ANSI flanges. smooth tubes |
| Surface finish | Industrial finish: welds are not hand polished. Final surface treatment: electropolished |
| Certificates | ATEX. EAC |
