NMS Main applications
For use in food, brew, beverage, pharmaceutical and chemical industries, as transfer and mixing pump for liquid food products, drinks, medicines, lotions, etc.
Typical applications: process pump for plate heat exchangers, pasteurizer systems, filters, filling machines, mixers, deaerators, carbonators and high pressure cleaning systems.
NMS Design
The Packo stainless steel multi-stage pumps of the NMS series can be used as a process pump under the most severe applications in the food and general industry. They can be used as a feeding pump or as a booster in some of the applications and are ideal for handling moderate flow rates at high pressure with a high pump efficiency (low energy cost). These process pumps are typically used for plate heat exchangers, filters, filling machines, high pressure CIP systems, etc.
NMS benefits pump
- Ideal for operation at moderate flow rate and high pressures
- High pump efficiency resulting in lower energy consumption
- Low NPSH values: less risk on cavitation
- Electropolished: higher resistance against corrosion
- Easy & robust construction and easy maintenance: less downtime
- Standard components
- Easy to install
- Open impellers: longer bearing life
NMS Description
The Packo stainless steel multi-stage pumps of the NMS series can be used as a process pump under the most severe applications in the food and general industry. They can be used as a feeding pump or as a booster in some of the applications and are ideal for handling moderate flow rates at high pressure with a high pump efficiency (low energy cost). These process pumps are typically used for plate heat exchangers, filters, filling machines, high pressure CIP systems, etc
NMS Curve
Overview of technical data NMS
| Max. flow | 50 m3/h |
| Differential head | 215 m wc |
| Max. Inlet pressure | 10 bar |
| Viscosity | 250 cP |
| Max. temperature | 140 °C |
| Impeller type | Open |
| Max. free passage | 14 mm |
| Max. drive power | 45 kW |
| Speed | 3000 / 3600 rpm |
| Available frequency | 50 / 60 Hz |
| Materials wetted parts | Stainless steel 316L or similar |
| Mechanical seal configuration | Single bellow, single balanced, quench, double |
| Available O-ring materials | EPDM, FKM |
| Connections | Flanges acc. to EN1092-1/01. Tri-Clamp fittings. etc. |
| Surface finish | Industrial finish: welds are not hand polished. Final surface treatment: electropolished |
| Certificates | 1935/2004 EC. FDA. ATEX. EAC |
