Features mechanical seal type 4111
- California Residents: PROPOSITION 65 WARNING
- Non-clogging, crest-to-crest wave spring
- Positive mechanical drive
- Self-aligning seal automatically adjusts for shaft end play and runout
- Fits seal chambers ANSI B73.1M and DIN 24960
- Robust non-pusher elastomer bellows design prevents sleeve fretting damage caused by O-ring design in abrasive applications
Recommended Applications type 4111
- Process pumps
- Other rotating equipment
- General-purpose low-duty applications
About Mechanical seal type 4111
The T4111 is a revolutionary new single-use cartridge seal that simplifies the sealing process for applications using aqueous solutions, making it suitable for industries such as wastewater treatment, food and beverage, and mining. It is recommended for use on centrifugal and rotary pumps, and similar rotary shaft equipment.
The name was derived from the total cost of repair. When considering the expense of shipping, handling, and inventory management in many cases it is more economical to purchase a new seal than repair it.
Users will benefit from cost savings, simplified installation, and reduced maintenance.
The Type 4111 cartridge seal bridges the gap between functionality and cost, making it a sensible option to replace certain component seals or upgrade from packing. It is a practical solution for small, lower-duty pumps that conform to ANSI and DIN standards.
Design Features mechanical seal type 4111
- Non-clogging crest to crest wave spring
- Positive mechanical drive
- Self-aligning automatically adjusts for shaft end play and runout
- Fits ANSI B73.1M, and DIN 24960 seal chambers
- Robust non-pusher elastomer bellows design prevents sleeve fretting damage caused by pusher O-ring design in abrasive applications
Material mechanical seal type 4111
- Primary ring: Carbon or silicon carbide
- Mating ring: Silicon carbide
- Cartridge hardware: 316 stainless steel
- Secondary seals: Fluoro elastomer
- Spring: 316 stainless steel
- Gasket/spacer: PTFE
Operating range mechanical seal type 4111
Temperature Limits
-40°C to 107°C/-40°F to 225°FPressure Limits
150 psi(g)/10.3 bar(g)Speed Limits
3600 rpm
Product Description type 4111
Type 4111 single-use seal is a general purpose seal targeted for low-duty
applications. With its stainless steel construction, it provides a service range
well beyond that which is possible with comparably priced seals of other
metallurgical construction. It is recommended for use in sealing centrifugal
and rotary pumps, and similar rotary shaft equipment.
