ICP3 Main applications
The Packo stainless steel centrifugal pumps of the ICP3 series are a low-cost industrial pump used for handling pure as well as slightly contaminated products up to 1000 cP. They are often used as process pump for the colouring of textiles, for water treatment but also for handling solvents, alcohols and chemicals.
ICP3 Design
These robust pumps have stainless steel 316L pump casings constructed in thick cold rolled plate and have closed investment cast impellers in duplex materials. Thanks to its solid construction and electropolished design these pumps are the reliable component for your production process.
ICP3 benefits pump
- High pump efficiency resulting in lower energy consumption
- Low NPSH values: less risk on cavitation
- Electropolished: higher resistance against corrosion
- Easy & robust construction and easy maintenance: less downtime
- Easy to install
- Solid impellers compared to low cost spot welded versions
2 mechanical seal diameters for entire range - Standard components
ICP3 Description
The Packo stainless steel centrifugal pumps of the ICP3 series are a low-cost industrial pump used for handling pure as well as slightly contaminated products up to 1000 cP. They are often used as process pump for the colouring of textiles, for water treatment but also for handling solvents, alcohols and chemicals.
ICP3 Curve
Overview of technical data ICP3
Max. flow | 320 m3/h |
Differential head | 120 m wc |
Max. Inlet pressure | 15 bar |
Viscosity | 1000 cP |
Max. temperature | 140 °C |
Impeller type | Closed with back vanes and balancing holes |
Max. free passage | 21 mm |
Max. drive power | 90 kW |
Speed | 3000 / 3600 rpm |
Available frequency | 50 / 60 Hz |
Materials wetted parts | Stainless steel 316L or similar |
Mechanical seal configuration | Single bellow, single balanced, quench, double, pressurized barrier |
Available O-ring materials | EPDM, FKM, FEP-FKM, FFKM, Silicone |
Connections | BSP fittings. flanges according to EN1092-1/01 & 02. ANSI flanges. smooth tubes |
Surface finish | Industrial finish: welds are not hand polished. Final surface treatment: electropolished |
Certificates | 1935/2004 EC. FDA. ATEX. MEI. EAC |