About Booster pump 2gp matrix

Booster sets with two horizontal multi-stage pumps with stainless steel hydraulics

Two MATRIX series pumps with self-ventilated 2-pole asynchronous motor, IE3 efficiency class for three phase motors starting from 0.75 kW. The system is equipped as standard with a control panel with alternating pump for the 2GPE version fitted with E-SPD inverter and is designed for the installation of storage tanks  (available on request).


  • Water supply for building service
  • Water supply for Industry
  • Irrigation

Application booster pump 2gp matrix

• Maximum liquid temperature: 50°C
• Maximum operating pressure: 10 bar
• Water with maximum presence of solids: 50 ppm (particle size 0.1-0.25 mm or less), no gas or corrosive and aggressive substances
• Maximum chlorine content: 500 ppm
• Altitude not exceeding 1000 m a.s.l.
• Humidity 50% without condensation
• Ambient protected against atmospheric agents


Material booster pump 2gp matrix

• Pump body, impeller and shaft in AISI 304
• Mechanical seal in Ceramic/Carbon/EPDM

Technical data booster pump 2gp matrix

• IE3 motor starting from 0.75kW
• Self-ventilated 2-pole asynchronous motor
• Class of insulation F
• IP55 Protection degree
• Single-phase voltage 230V ±10% 50Hz,Threephase voltage 400V ±10% 50Hz