About Pump 2gp aga
Booster sets with two horizontal single impeller pumps with cast iron hydraulics
Two pumps of AGA series with 2-pole induction motor with self-ventilated 2-pole asynchronous motor, IE3 efficiency class for three phase motors starting from 0.75 kW. The system is equipped as standard with a control panel with alternating pump and is designed for the installation of storage tanks (available on request).
Features
- Water supply for building service
- Water supply for Industry
- Irrigation
Application Booster pump 2gp aga
• Maximum liquid temperature: 45°C
• Maximum operating pressure: 10 bar
• Water with maximum presence of solids: 50 ppm (particle size 0.1-0.25 mm or less), no gas or corrosive and aggressive substances
• Maximum chlorine content: 500 ppm
• Altitude not exceeding 1000 m a.s.l.
• Humidity 50% without condensation
• Ambient protected against atmospheric agents.
Material booster pump 2gp aga
• Cast iron pump body
• Shaft in AISI 303
• Glass fibre reinforced technopolymer impeller for AGA 1.00, brass for the rest of the range
• Mechanical seal in Ceramic/Carbon/NBR
Technical data booster pump 2gp aga
• IE3 motor starting from 0.75kW
• Self-ventilated 2-pole asynchronous motor
• Class of insulation F
• IP44 Protection degree
• Single-phase voltage 230V ±10% 50Hz,Threephase voltage 400V ±10% 50Hz
|
Model |
KW |
HP |
Q=Capacity |
|
||||||||
|
I/min |
10 |
20 |
40 |
60 |
90 |
100 |
120 |
160 |
200 |
|||
|
m/h |
0.6 |
1.2 |
2.4 |
3.6 |
5.4 |
6.0 |
7.2 |
9.6 |
12.0 |
|||
|
H=Total head |
|
|||||||||||
|
2GP AGA 1.00 M |
0.75+0.75 |
1+1 |
|
47.5 |
45.5 |
40.3 |
35.7 |
29.1 |
27.0 |
23.0 |
– |
– |
|
2GP AGA 1.5 M |
1.1+1.1 |
1.5+1.5 |
|
– |
48.0 |
45.1 |
42.4 |
38.6 |
37.4 |
35.1 |
30.8 |
27.0 |
|
2GP AGA 2.00 |
1.5+1.5 |
2+2 |
|
– |
59.0 |
55.6 |
52.2 |
47.3 |
45.7 |
42.5 |
36.4 |
30.5 |
|
2GP AGA 3.00 |
2.2+2.2 |
2.2+2.2 |
|
– |
68.0 |
64.3 |
60.8 |
55.9 |
54.4 |
51.6 |
46.4 |
42.0 |
