Main applications invcp-invcn
- Chemical industry
- Cooling water and condensate
- Energy
- Industry engineering
- Mining
- Oil /Gas
- Petrochemical Industry
- Power Stations > 100 MW
- Process
- Water
- Water supply
- Watertransport
Design invcp-invcn
Vertical immersion pump for wet or dry installation, available with closed or semi-open impeller. Supplied with discharge pipe extending above the baseplate (INVCP) or without discharge pipe (INVCN). ATEX-compliant version available.
Application pump invcp-invcn
Pumping chemically aggressive, slightly contaminated or solids-laden fluids in the chemical and petrochemical industries.
Technical data
- Q max1,600.0 m³/h
- H max100.0 m
Overview of technical data invcp-invcn
| Q (50Hz) | 0.6 – 1,600.0 (m³/h) |
| H (50Hz) | 2.2 – 100.0 (m) |
| Type of bearing | Rolling element and plain bearings |
| Casing partition | Radially split |
| Drive | Electric motor |
| Drive frequency | 50 Hz /60 Hz |
| Type of drive | Electric motor |
| Drive voltage | Low voltage |
| Connection to power supply | 230/400 V, 3~ |
| Explosion protection | ATEX (94/9/EC) |
| Maximum submergence | 5410.0 (mm) |
| Impeller material (EN standard) | CF8M, JL1040 |
| Type of coupling | Direct |
| Type of lubrication | Product lubrication |
| Max. permissible fluid temperature | 100.0 (°C) |
| Pump set location | Dry installed, floodable |
| Shaft material (EN standard) | AISI-316L, F-114 |
| Suction characteristics | Non-priming |
| Top plate | Yes |
| Type of impeller | Open, Closed / Radial |
| Casing material (EN standard) | CF8M, JL1040 |
| Installation position | Vertical |
| Shaft seal type | Gland packing, Shaft seal ring, Mechanical seal |
| Main applications | Industry and process engineering, Water |
| Casing material | Cast iron, Stainless steel |
| Maximum discharge-side pressure | 10.0 (bar) |
| Maximum drive rating | 288.0 (kW) |
| Type of installation | Stationary |
| Maximum speed of rotation | 3500.0 (1/min) |
