Main applications Etanorm V
- Breweries
- Food and beverages
- General Processes
- Industrial waste water
- Industry engineering
- Municipal waste water
- Surface treatment
- Suspended solids treatment
- Waste water
Technical data
- Q max 740.0 m³/h
- H max 100.0 m
Design Etanorm V
Single-stage volute casing pump for vertical installation in closed tanks under atmospheric pressure, with ratings to EN 733. Suitable for immersion depths of up to 2000 mm.
Application pump Etanorm V
Phosphating solutions, lubricating oil supply and sealing oil supply for turbines, generators, large compressors, large gear units
Drive pump Etanorm V
Standard design:
- KSB/Siemens surface-cooled IEC frame three-phase
squirrel-cage motor - Efficiency class IE1 (size 71/80) / IE3 (from size 90) to
IEC 60034-30 - Rated voltage (50 Hz) 230 V / 400 V ≤ 2.20 kW
- Rated voltage (50 Hz) 400 V / 690 V ≥ 3.00 kW
- Rated voltage (60 Hz) – / 460 V ≤ 2.20 kW
- Rated voltage (60 Hz) 460 V / – ≥ 3.00 kW
- Type of construction IM V1
- Enclosure IP55
- Duty cycle: continuous duty S1
- Thermal class F with temperature sensor, 1 PTC thermistor
(size 80/90) / 3 PTC thermistors (from size 100)
Desing Details pump Etanorm V
Shaft seal
- Controlled gap
Impeller type - Closed radial impeller with multiply curved vanes
Bearings
Design D:
- Deep groove ball bearings greased for life in a bearing
lantern above the cover plate, pump shaft cantilevered
below the cover plate
Design W:
- Product-lubricated SiC/SiC plain bearing (pump end), rigid
coupling between pump shaft and motor shaft
Fluids handled
▪ Water
▪ Wash water with degreasing agents
▪ Lubricating oils and sealing oils
▪ Phosphating solutions and electrophoretic coating paint
(e.g. cataphoretic dip paint)1)
▪ Hydraulic oils
Overview of technical data Etanorm V
Q (50Hz) | 3.0 – 740.0 (m³/h) |
H (50Hz) | 1.5 – 100.0 (m) |
Type of bearing | Rolling element bearings |
Casing partition | Radially split |
Drive frequency | 50 Hz /60 Hz |
Type of drive | Electric motor |
Drive voltage | Low voltage |
No. of impeller entries | Single entry |
Maximum submergence | 2000.0 (mm) |
Impeller material (EN standard) | 1.4408 / A743 GR CF8 M, EN-GJL-250 / A 48 CL 35B |
Type of coupling | Direct |
Type of lubrication | Grease lubrication |
Max. permissible fluid temperature | 95.0 (°C) |
Nozzle position | Variable |
Maximum operating pressure | PN 10, PN 16 |
Pump set location | Wet well |
Shaft material (EN standard) | 1.4462, C45+N |
Standard | EN 733 |
Suction characteristics | Non-priming |
Top plate | Yes |
Type of casing | Volute casing |
Type of impeller | Radial, Closed |
Type of connection | Flange |
Casing material (EN standard) | 1.4408 / A743GR CF8 M, EN-GJL-250 / A 48 CL 35B |
eClass assignment | 36410101, 03641000, 36410100 |
Installation position | Vertical |
Shaft seal type | Shaft seal ring |
Main applications | Industry and process engineering, Waste water / sewage |
Casing material | Cast iron, Stainless steel |
Maximum discharge-side pressure | 10.0 (bar) |
Maximum drive rating | 90.0 (kW) |
Type of installation | Stationary |
Maximum speed of rotation | 3500.0 (1/min) |