IPP2 Main applications
The Packo high pressure pumps of the IPP2 series are used primarily in reverse osmosis (RO) applications for the filtration of, for example, contaminated CIP-water, whey, etc. They are also used as a booster pump in a variety of skids.
You will find them in just about all industries including the dairy industry, breweries, beverage industry as well as in water treatment industry.
Ipp2 Design
The industrial Packo stainless steel pumps of the IPP2 series are pumps made of solid, machined stainless steel 316L and are extremely suitable for high system pressure applications up to 40 bar. Typical applications can be found in reverse osmosis applications in food (f.i. whey filtration) or waste water applications (f.i. waste CIP liquid).
IPP2 benefits pump
- Suitable for system pressure applications up to 40 bar
- High pump efficiency resulting in lower energy consumption
- Low NPSH values: less risk on cavitation
- Electropolished: higher resistance against corrosion
- Easy and robust construction and easy maintenance: less downtime
- Standard components
- Easy to install
- 2 seal diameters for entire range
IPP2 Description
The industrial Packo stainless steel pumps of the IPP2 series are pumps made of solid, machined stainless steel 316L and are extremely suitable for high system pressure applications up to 40 bar. Typical applications can be found in reverse osmosis applications in food (f.i. whey filtration) or waste water applications (f.i. waste CIP liquid).
IPP2 Curve
Overview of technical data IPP2
| Max. flow | 110 m3/h |
| Differential head | 110 m wc |
| Max. Inlet pressure | 40 bar |
| Viscosity | 1000 cP |
| Max. temperature | 140 °C |
| Impeller type | Open |
| Max. free passage | 20 mm |
| Max. drive power | 45 kW |
| Speed | 3000 / 3600 rpm |
| Available frequency | 50 / 60 Hz |
| Materials wetted parts | Stainless steel 316L or similar |
| Mechanical seal configuration | Single balanced, quench, double |
| Available O-ring materials | EPDM, FKM, FEP-FKM, FFKM, Silicone |
| Connections | Flanges according to EN1092-1/11 PN40. Tri-Clamp fittings. etc. |
| Surface finish | Industrial finish: welds are not hand polished. Final surface treatment: electropolished |
| Certificates | 1935/2004 EC. FDA. EAC |
