Main applications Etanorm
- Biofuels
- Breweries
- Building services
- Chemical industry
- Desalination
- Energy
- Fire fighting and sprinkler systems
- Food and beverages
- HVAC
- Heating / ventilation / air-condition
- Industrial waste water
- Industry engineering
- Irrigation
- Municipal waste water
- Power Stations < 100 MW
- Power Stations > 100 MW
- Pressure boosting
- Process
- Pumps used as Turbines
- Rawwater transport
- Steel
- Suspended solids treatment
- Systems
- Turbine oil supply
- Waste water
- Water
- Water supply
- Water transport
- Water works
- Watertransport
- Watertreatment
Design Etanorm
Horizontal volute casing pump, single-stage, with ratings and main dimensions to EN 733, long-coupled, back pull-out design, with replaceable shaft sleeves / shaft protecting sleeves and casing wear rings, with motor-mounted variable speed system. With KSB SuPremE, a magnetless synchronous reluctance motor of efficiency class IE4/IE5 to IEC TS 60034-30-2:2016, for operation with the KSB PumpDrive 2 or KSB PumpDrive 2 Eco variable speed system without rotor position sensors. Motor mounting points in accordance with EN 50347, envelope dimensions in accordance with DIN V 42673 (07-2011). ATEX-compliant version available.
Application pump au monobloc
Pumping clean or aggressive liquids not chemically or mechanically aggressive to the pump materials in water supply systems, cooling circuits, swimming pools, fire-fighting systems, irrigation systems, drainage systems, heating systems, air-conditioning systems, spray irrigation systems
Drive pump Etanorm
- Surface-cooled KSB SuPremE motor, IEC-compatible,
magnetless synchronous reluctance motor (PumpDrive
required) - Efficiency class IE4/IE5 to IEC TS 60034-30-2:2016
- Mounting points to EN 50347:2001
- Envelope dimensions to DIN VDE 42673-4:2011-07
- Type of construction IM B3
- Enclosure IP55
- Duty cycle: continuous duty S1
- Thermal class F with temperature sensor, 3 PTC thermistors
- Shaft centreline height 71 to 225 mm
- Rated power 0.55 kW to 45 kW
- Rated speed 1500 rpm or 3000 rpm
- Frequency 50 Hz / 60 Hz (PumpDrive input)
- Voltage 380 V to 480 V (PumpDrive input)
Desing Details pump Etanorm
Design
- Volute casing pump
- Horizontal installation
- Back pull-out design
- Single-stage
- Dimensions and ratings to EN 733
- Requirements to 2009/125/EC Directive
- Fixed speed version (without PumpDrive) / variable speed
version (with PumpDrive)
Pump casing
- Radially split volute casing
- Volute casing with integrally cast pump feet
- Replaceable casing wear rings (optional for pump casing
material C)
Shaft seal
- Gland packing
- Single mechanical seals and double mechanical seals to
EN 12756 - Shaft equipped with replaceable shaft sleeve in the shaft
seal area
Impeller type
- Closed radial impeller with multiply curved vanes
Bearings
Standard:
- Deep groove ball bearing (floating bearing assembly)
Reinforced - Deep groove ball bearing (floating bearing assembly)
Overview of technical data Etanorm
| Q (50Hz) | 1.5 – 740.0 (m³/h) |
| H (50Hz) | 2.0 – 160.0 (m) |
| Type of bearing | Ball bearings |
| Casing partition | Radially split |
| Drive frequency | 50 Hz /60 Hz |
| Type of drive | Electric motor |
| Drive voltage | Low voltage |
| Explosion protection | IP 55 |
| No. of impeller entries | Single entry |
| Impeller material (EN standard) | 1.4408 / A743 GR CF8 M, CC480K-GS / B30 C90700, JL1040 / A 48 CL 35B |
| Type of installation | Long-coupled |
| Type of coupling | Direct |
| Type of lubrication | Grease / Oil lubrication |
| Max. permissible fluid temperature | 140.0 (°C) |
| Guaranteed to be silicon-free | Yes |
| Nozzle position | End suction |
| Maximum operating pressure | PN 16 |
| Pull-out design | Yes |
| Pump set location | Dry installed |
| Shaft material (EN standard) | 1.4571, C45+N |
| Standard | EN, EN / ANSI |
| Suction characteristics | Non-priming |
| Suitable for drinking water | Yes |
| Type of casing | Volute casing |
| Type of impeller | Closed / Radial |
| Type of connection | Flange |
| UNSPSC classification | 4015150300 |
| Casing material (EN standard) | 1.4408 / A743 GR CF8 M, CC480K-GS / B30 C90700, JL1040 / A48CL35B, JS1030 / A536 GR 60-40-18 |
| eClass assignment | 36410000, 36410100, 36410101 |
| Installation position | Horizontal |
| Shaft seal type | Mechanical seal, Gland packing |
| Main applications | Industry and process engineering, Water, Energy, Building services |
| Casing material | Cast iron, Stainless steel, Nodular cast iron, Bronze |
| Maximum discharge-side pressure | 16.0 (bar) |
| Type of installation | Stationary |
| Maximum speed of rotation | 3500.0 (1/min) |
