Main applications lcc-m
- Ash removal
- Dredging
- Hard Rock mining
- Industrial Process
- Mineral Mining
- Mining
- Slurry
Technical data
- Q max 3,405.0 m³/h
- H max 90.0 m
Design lcc-m
The wetted pump end (casing, impeller and suction plate / liner) is made of white cast iron. Design optimised to permit easy dismantling and reassembly for maintenance and inspections.
Application pump lcc-m
Reliable pump for high heads and moderately corrosive slurries. Used in mine dewatering, ash and tailings transport and dredging.
Overview of technical data lcc-m
| Q (50Hz) | 25.0 – 3,405.0 (m³/h) |
| H (50Hz) | 5.0 – 90.0 (m) |
| Type of bearing | Rolling element bearings |
| Type of drive | Electric motor, turbine, I.C. engine |
| Type of coupling | Direct, Gear, None, Variable speed coupling, Jack shaft / Belt drive, Float switch, Bubbler system |
| Type of lubrication | Grease / Oil lubrication |
| Pump set location | Dry installed, Wet well, Dry installed, floodable |
| Free passage | 135.0 (mm) |
| Shaft seal type | Gland packing, Mechanical seal, Hydrodynamic seal |
| Main applications | Industry and process engineering, Water, Waste water / sewage, Energy, Mining / Dredges, Shipping / Shipbuilding |
| Type of installation | Transportable, Stationary |
