Self-Priming pump
Main applications filtra n
- Building services
- Swimming pools
- Water supply
Technical data
- Q max 36.0 m³/h
- H max 21.0 m
Design filtra n
Single-stage self-priming centrifugal pump in close-coupled design.
Application pump filtra n
Pumping clean or slightly contaminated water, swimming pool water with a max. chlorine content of 0.3 %; ozonised swimming pool water with a max. salt content of 7 ‰.
Drive pump au monobloc
- Surface-cooled
- Enclosure IP44
- Thermal class F
Desing Details pump filtra n
Single-phase AC motor:
▪ 230 V
▪ Temperature switch with automatic reset and start-up
Three-phase motor:
▪ 230/400 V
Shaft seal
▪ Mechanical seal
Bearings
▪ Motor runs in grease-lubricated rolling element bearings
Overview of technical data filtra n
| Q (50Hz) | 0.0 – 36.0 (m³/h) |
| H (50Hz) | 3.0 – 21.0 (m) |
| Type of bearing | Ball bearings |
| Drive | Electric motor |
| Drive frequency | 50 Hz |
| Type of drive | Electric motor |
| Drive voltage | Low voltage |
| Connection to power supply | 400 V, 3~ |
| Impeller material (EN standard) | NORYL |
| Type of installation | Close-coupled |
| Type of coupling | Direct, None |
| Type of lubrication | Product lubrication |
| Max. permissible fluid temperature | 35.0 (°C) |
| Nozzle position | Variable |
| Maximum operating pressure | PN 2,5 |
| Pump set location | Dry installed |
| Shaft material (EN standard) | CHROMSTAHL, 1.4404 |
| Suction characteristics | Non-priming |
| Type of impeller | Closed |
| Type of connection | Thread |
| UNSPSC classification | 4015150300 |
| Casing material (EN standard) | PP |
| eClass assignment | 36410101 |
| Installation position | Horizontal |
| Shaft seal type | Mechanical seal |
| Main applications | Building services |
| Casing material | Plastics |
| Maximum discharge-side pressure | 2.5 (bar) |
| Maximum drive rating | 2.2 (kW) |
| Type of installation | Stationary |
| Maximum speed of rotation | 2900.0 (1/min) |
