Ana uygulamalar rph-v
- Kimyasal endüstri
- Endüstri mühendisliği
- Açık deniz platformları
- Petrol gazı
Teknik veri
- Q max 80.0 m³/h
- H max 240.0 m
Tasarım rph-v
API 610 ve ISO 13709’a (ağır hizmet) uygun dikey radyal bölünmüş salyangoz gövdeli pompa, tip VS4, radyal çarklı, tek girişli, tek kademeli.
Uygulama pompası rph-v
Rafineriler, petrokimya ve kimya endüstrileri, açık deniz ve kara süreçleri.
Tahrik pompası rph-v
- Electric motor
- Internal combustion engine
- Turbine
Tasarım Ayrıntıları pompa rph-v
Tasarım
▪ Salyangoz gövdeli pompa
▪ Dikey kurulum
▪ Tek kademeli
▪ API 610, 11. baskı / ISO 13709’un teknik gereksinimlerini karşılar
▪ API 610, 11. baskıya göre mil sapması
▪ Pompa mili, ara mil ve üst mil
konik bir kaplin ile bağlanır.
Direction of rotation
▪ Clockwise, viewed from the drive end.
Shaft seal
Standard design:
▪ Mechanical seal
▪ Mechanical seal chamber to API 610, 11th edition
▪ KSB cartridge seal
Pump casing
▪ Single volute
▪ Radially split volute casing
▪ Volute casing with casing wear ring
▪ Casing cover
Impeller type
▪ Closed radial impeller
▪ Impeller with impeller wear ring on the suction side only for hydraulically balanced impellers
Teknik verilere genel bakış rph-v
| Q (50Hz) | 0.0 – 80.0 (m³/h) |
| H (50Hz) | 0.0 – 240.0 (m) |
| Type of bearing | Ball bearings |
| Drive frequency | 50 Hz /60 Hz |
| Type of drive | Electric motor |
| Drive voltage | Low voltage |
| No. of impeller entries | Single entry |
| Type of installation | Long-coupled |
| Type of coupling | Direct |
| Type of lubrication | Product lubrication |
| Max. permissible fluid temperature | 230.0 (°C) |
| Pump set location | Dry installed, floodable |
| Standard | API 610, ISO 13709 |
| Suction characteristics | Non-priming |
| Type of casing | Volute casing |
| Type of impeller | Closed, Multi-vane impeller, Radial, Closed / Radial |
| Type of connection | Flange |
| Installation position | Vertical |
| Shaft seal type | Mechanical seal |
| Main applications | Industry and process engineering, Energy, Oil / Gas |
| Type of installation | Stationary |
| Maximum speed of rotation | 3500.0 (1/min) |
