DESIGN Pumps NMP
End-Suction Pumps Stainless Steel Sheet
- The pump parts are made of high strength, high-quality, corrosion-resistant stainless steel.
- Horizontal or vertical mounting options are available.
- Thanks to back pull out, easy access to impeller and seal is provided without removing suction and discharge line.
- Alignment errors are reduced and the smooth installation due to centered discharge outlet at the upper side and support legs under the casing.
- High operating efficiency – low operating costs
- The noise level has been reduced because of lightweight and compact design.
- Using high quality bushings and o-rings, ensuring compliance standard pumping process and high-temperature and chemical environments.
- When using only mechanical seal at monobloc model, mechanical seal or soft packing is used at coupling connection model.
TECHNICAL specifications pump NMP
| Suction Flange | DN 40 – DN 100 |
| (TS EN 1092 – 2) | |
| Discharge Flange | DN 32 – DN 80 |
| (TS EN 1092 – 2) | |
| Working Pressure | 10 Bar |
| Ambient Temperature | Up to + 400 C |
| Fluid Temperature | -200 C / +1000 C |
| Flow Range | 3 – 200 m3/h |
| Head Range | 10 – 70 m |
SCOPE OF APPLICATION pump NMP
- NMP series stainless centrifugal pumps having a wide field of application. This serie is used in the transport of water and industrial fluids and can be worked on different temperature, flow and pressure range. General fields of applications are as follows.
- Water Supply: Water Filtration and transportation, Pressurized the main channel
- Industrial pressurization: wetting and Cleaning System
- Transportation of industrial liquid: Textile Dye house, Pharmaceutical, Food, Chemical, Water Supply boiler, condenser, cooling and air conditioning systems, transportation of acid and alkali-based liquid
- Water Treatment, Water Filtration (reverse osmosis) Systems, Swimming Pools
Bearings pump NMP
Rolling bearings are used in centrifugal pumps which have coupling connection. In pumps complying with DIN 24255, the bearing is provided with two 6300-2RS-C3 type ball bearings which are lubricated lifelong with special grease according to DIN 625 standard. In order to prevent the leakage flow into the bearing housing, deflectors are provided in front of the bearing cover
Drive Pump NM
TEFC (Totally Enclosed Fan Cooled) 3 phase, squirrel caged, in accordance to DIN 42673, IM 1001B3 type electrical motor which complies with DIN IEC and VDE is used to drive the pump in proper speed and powe
Shaft Seal pump NMP
The pumps are provided with the rigid shaft capable of supporting different loading conditions. Since the shaft diameter is highly resistant to bending and the distance between the bearing and the sealing is short, pump can operate at optimal conditions for the sealin
