Description pump 6-8-10R-P
6”, 8”, 10”rewindable borehole water cooled motors. Power from 5,5 kW up to 185 kW. Available with mechanical seal. Standard winding is PPC, on request is available LPE and PE2+PA windings for water temperatures up to 50°C.
6 “, 8”, 10 “submersible motors rewindable in water bath. Power from 4 kW up to 185 kW. Available with mechanical seal. Standard PPC winding, PE2 + PA winding available for temperatures up to 50 ° C. AISI 304, AISI 316, DUPLEX versions available. NEMA coupling flange.
All 6 “- 8” – 10 “standard motors with PPC windings can operate at liquid temperatures up to 30 ° C without derating factor. From 31 ° C till 43 ° C theymotors have to be derated according to the factor shown in the following graph.
Technical Data 50Hz
Technical Data 60Hz
CONSTRUCTION FEATURES
Motor Data
Technical Data 50Hz
MODEL 3~ | HP | kW |
---|---|---|
6R 7 P | 7.5 | 5.5 |
6R 10 P | 10 | 7.5 |
6R 12 P | 12.5 | 9.2 |
6R 15 P | 15 | 11 |
6R 17 P | 17.5 | 13 |
6R 20 P | 20 | 15 |
6R 25 P | 25 | 18.5 |
6R 30 P | 30 | 22 |
6R 35 P | 35 | 26 |
6R 40 P | 40 | 30 |
6R 50 P | 50 | 37 |
8R 40 P | 40 | 30 |
8R 50 P | 50 | 37 |
8R 60 P | 60 | 45 |
8R 75 P | 75 | 55 |
8R 90 P | 90 | 66 |
8R 100 P | 100 | 75 |
8R 125 P | 125 | 92 |
8R 150 P | 150 | 110 |
10R 100 P | 100 | 75 |
10R 125 P | 125 | 92 |
10R 150 P | 150 | 110 |
10R 175 P | 175 | 130 |
10R 200 P | 200 | 150 |
10R 225 P | 225 | 165 |
10R 250 P | 250 | 185 |
Technical Data 60Hz
MODEL 3~ | HP | kW |
---|---|---|
6R 7 P | 7.5 | 5.5 |
6R 10 P | 10 | 7.5 |
6R 12 P | 12.5 | 9.2 |
6R 15 P | 15 | 11 |
6R 17 P | 17.5 | 13 |
6R 20 P | 20 | 15 |
6R 25 P | 25 | 18.5 |
6R 30 P | 30 | 22 |
6R 35 P | 35 | 26 |
6R 40 P | 40 | 30 |
6R 50 P | 50 | 37 |
8R 40 P | 40 | 30 |
8R 50 P | 50 | 37 |
8R 60 P | 60 | 45 |
8R 75 P | 75 | 55 |
8R 90 P | 90 | 66 |
8R 100 P | 100 | 75 |
8R 125 P | 125 | 92 |
8R 150 P | 150 | 110 |
10R 100 P | 100 | 75 |
10R 125 P | 125 | 92 |
10R 150 P | 150 | 110 |
10R 175 P | 175 | 130 |
10R 200 P | 200 | 150 |
10R 225 P | 225 | 165 |
10R 250 P | 250 | 185 |
CONSTRUCTION FEATURES
Seal | lip seal (mechanical seal on request) |
---|---|
Upper / bottom support | G25 (standard), AISI 304(RS), AISI 316(RX), Duplex (RD) |
External jacket | AISI 304(standard/RS), AISI 316(RX), Duplex (RD) |
Bearings | radial and axial (water lubricated) |
Extended Shaft | AISI 304(standard/RS), AISI 316(RX), Duplex (RD) |
Motor Data
Asynchronous 2 poles rewindable in water filled | 3~ 3x400V ± 10% – 50 Hz, 3~ 3×400/690V ± 10% – 50 Hz |
---|---|
Cooling Flow | min 0,5 m/s |
Insulation class | Y |
Insulation | PE2+PA (P) |
Protection degree | IP68 |