Description pump dg
Drainage pump for rainwater with set-back Vortex type stainless steel impeller and cast iron pump body. This pump is suitable for pumping liquids with suspended solids; ideal for civil and household applications. The sealing system consists of two seals lubricated in oil chamber.
Drainage pumps with set-back type impeller Vortex for pumping waste water and liquids with bodies in suspension; ideal in applications civil and domestic.
Drainage pump with set-back Vortex type impeller for pumping charged waters and liquids with suspended solids; ideal for civil and household applications.
Vortex type retracted turbine drainage pumps for pumping heavy water and liquids with bodies in suspension; ideal in applications civil and domestic.
Vortex type offset impeller drainage pumps for pumping sewage and liquids with suspended body; ideal in applications civil and domestic.
MODEL 1~ | MODEL 3~ | FLOW RATE (l/min) | H (m) | PIPE-DNM |
---|---|---|---|---|
DG 80 G | 50 ÷ 250 | 7.4 ÷ 3.7 | 1″ 1/2 | |
DG 80 | DGT 80 | 50 ÷ 250 | 7.4 ÷ 3.7 | 1″ 1/2 |
DG 80/2 G | 50 ÷ 250 | 7.4 ÷ 3.7 | 2″ | |
DG 80/2 | DGT 80/2 | 50 ÷ 250 | 7.4 ÷ 3.7 | 2″ |
DG 100 G | 50 ÷ 300 | 9.4 ÷ 5.7 | 1″ 1/2 | |
DG 100 | DGT 100 | 50 ÷ 300 | 9.4 ÷ 5.7 | 1″ 1/2 |
DG 100/2 G | 50 ÷ 300 | 9.4 ÷ 5.7 | 2″ | |
DG 100/2 | DGT 100/2 | 50 ÷ 300 | 9.4 ÷ 5.7 | 2″ |
DG 82 G | 50 ÷ 350 | 6 ÷ 1.3 | 2″ | |
DG 82 | DGT 82 | 50 ÷ 350 | 6 ÷ 1.3 | 2″ |
DG 102 G | 50 ÷ 400 | 7.1 ÷ 1.3 | 2″ | |
DG 102 | DGT 102 | 50 ÷ 400 | 7.1 ÷ 1.3 | 2″ |
MODEL 1~ | MODEL 3~ | FLOW RATE (l/min) | H (m) | PIPE-DNM |
---|---|---|---|---|
DG 80 G | 50 ÷ 250 | 7.4 ÷ 3.7 | 1″ 1/2 | |
DG 80 | DGT 80 | 50 ÷ 250 | 7.4 ÷ 3.7 | 1″ 1/2 |
DG 80/2 G | 50 ÷ 250 | 7.4 ÷ 3.7 | 2″ | |
DG 80/2 | DGT 80/2 | 50 ÷ 250 | 7.4 ÷ 3.7 | 2″ |
DG 100 G | 50 ÷ 300 | 9.4 ÷ 5.7 | 1″ 1/2 | |
DG 100 | DGT 100 | 50 ÷ 300 | 9.4 ÷ 5.7 | 1″ 1/2 |
DG 100/2 G | 50 ÷ 300 | 9.4 ÷ 5.7 | 2″ | |
DG 100/2 | DGT 100/2 | 50 ÷ 300 | 9.4 ÷ 5.7 | 2″ |
DG 82 G | 50 ÷ 350 | 6 ÷ 1.3 | 2″ | |
DG 82 | DGT 82 | 50 ÷ 350 | 6 ÷ 1.3 | 2″ |
DG 102 G | 50 ÷ 400 | 7.1 ÷ 1.3 | 2″ | |
DG 102 | DGT 102 | 50 ÷ 400 | 7.1 ÷ 1.3 | 2″ |
Pump body | cast iron with openings 1″ 1/2 or 2″ |
---|---|
Impeller | stainless steel set-back Vortex |
Shell, motor cover, base support | stainless steel |
Mechanical seal | double seal with oil barrier; silicon carbide on pump side, sealing ring on motor side |
Motor shaft | stainless steel AISI 430 |
Passage of solids | Ø max 35 mm (DG 80-100), Ø max 50 mm (DG 82-102) |
Liquid temperature | 0-40 °C |
Cable | H07 RNF, 10 mt |
G | float switch |
Max Depth of immersion | 5 mt |
2 poles induction motor | 3~ 220/380V-60Hz, 1~ 220V-60Hz with thermal protection |
---|---|
Insulation class | F |
Protection degree | IP68 |